ANALISIS SIFAT PENYERAPAN AIR DAN INDEKS NYALA API PADA PAPAN KOMPOSIT YANG DI PERKUAT SERAT DAUN PANDAN DURI DAN LIMBAH SERBUK GERGAJI KAYU SENGON DENGAN RESIN POLYESTER

Journal Title: Dinamika Teknik Mesin - Year 2015, Vol 5, Issue 2

Abstract

The use of composite materials as an alternative to metallic materials in the field of engineering more widespread, not only as an interior daneksterior in the automotive field but also extended to other areas such as property and architecture is to reduce the incidence of fire one only to find a replacement for wood as a raw material of houses and buildings with other alternative materials are more fire resistant, the material need not be limited in mechanical strength, but also on the physical properties. Therefore, the aim of this study was to analyze the absorption properties of water and fire index in the fiber-reinforced composite board pandanus leaves thorns and wood sawdust filler sengon with polyester resin as matriknya. Analysis of the absorption properties of the water carried by the ASTM D 5529 with a variation of the length of time of immersion (10, 20, and 30 days) and the fiber volume fraction (0%, 10%, 20% and 30%). Testing index of the flame using ASTM E1321 with long burning time of 10 minutes. To test the effect of soaking time and a fiber volume fraction of the weight gain, volume, and density on the board fiber composite pandanus thorns with 10% filler wood sawdust sengon diguanakn Two Ways Analysis Of Variance, and the effect of fiber volume fraction to index Flash Fire is used One Ways Analysis Of Variance. The results showed that the water absorption is affected by fiber volume fraction and longer soaking time. The largest percentage of water absorption occurs in the volume fraction of 30% with long soaking time of 30 days is 24.41%. Similarly, the highest percentage swelling occurs in composite board with a volume fraction of 30% with a 30-day long soaking time is 11:22% .Then the flame to the percentage of the index without fiber composite board has a greater percentage is 167.03%. By contrast the percentage of board composite index gained shortest of composite board with a fiber volume fraction of 30% ie 70.25% composite board with a fiber volume fraction of 30% also have a flame index is lower than the comparison is with wood composites sengon.

Authors and Affiliations

Keywords

Related Articles

Penerapan IPTEKS pada usaha handycraft ketak berorientasi ekspor di desa Karang Bayan Kecamatan Lingsar Kabupaten Lombok Barat

Products Woven or ketak is a handicraft product produced by the ‘artisans’ community in the village of Karang Bayan West Lombok with raw materials from plants ketak. In the process it takes the necessary skills to weave...

PENGARUH KOMPOSISI BRIKET BIOMASSA KULIT KACANG TANAH DAN ARANG TONGKOL JAGUNG TERHADAP KARAKTERISTIK BRIKET

Energy crisis in the world especially from fossil fuels which caused by the depletion of non-renewable petroleum reserves. It is therefore necessary to find sources of alternative fuels that are renewable. Biomass is a s...

Pengaruh jumlah haluan pipa paralel pada kolektor surya plat datar absorber batu kerikil terhadap laju perpindahan panas

Recently the use of energy increases. It leads to the energy crisis. Therefore, it is important to promote alternative energy (renewable energy). One of renewable energies, which is potential in Indonesia, is solar enrgy...

Analisis pemakaian bahan bakar biogas termurnikan pada unjuk kerja motor bakar

The long term purpose of this research is to obtain the high quality renewable biogas that can be used as fuel for internal combustion engines to drive an electricity generator as energy diversification efforts in the ar...

Uji sifat fisik dan kimia bioetanol dari jagung (Zea mays L)

The aim of this research is to know the physical characteristics and chemical contents of corn bioethanol (Zea Mays L.). The bioethanol is produced by distillation process through variations in fermentation duration. The...

Download PDF file
  • EP ID EP229546
  • DOI -
  • Views 70
  • Downloads 0

How To Cite

(2015). ANALISIS SIFAT PENYERAPAN AIR DAN INDEKS NYALA API PADA PAPAN KOMPOSIT YANG DI PERKUAT SERAT DAUN PANDAN DURI DAN LIMBAH SERBUK GERGAJI KAYU SENGON DENGAN RESIN POLYESTER. Dinamika Teknik Mesin, 5(2), -. https://europub.co.uk/articles/-A-229546