Analisis tekanan udara, sudut slip dan ukuran lebar ban tipe radial terhadap rolling resistance dengan metode taguchi
Journal Title: Dinamika Teknik Mesin - Year 2018, Vol 8, Issue 1
Abstract
Rolling resistance is one of the main factors affecting the fuel efficiency of a vehicle. Rolling resistance is resistance to the wheels that will and has been rolled due to the force of friction between the wheels with the road surface of the wheel, due to the deformation process on the tire structure, contact area and road surface. Radial tires are tires where the reinforcing fibers on the carcass are arranged radially, have a greater ability to withstand lateral forces and generally have high ratio aspect ratio, widht smaller than the bias tires. The taguchi method is a new methodology in engineering aimed at improving product and process quality, minimizing cost and time. The purpose of this research is to know the air pressure influence, slip angle and tire width to rolling resistance. The research was conducted experimentally by using taguchi method. The result showed that the highest rolling resistance force accurred at a combination of air pressure of 175 kPa, 9o wheel slip angle and 90 mm widht of tire size of 36.914 N. While the smallest rolling resistance was obtained with combining the parameters at the air pressure level of 325 kPa, slip angle 1o and the size of the 70 mm tire widht of 11.511 N at 350 rpm and normal load 580 N. From the result it can be concluded that the change in the level of the three air pressure parameters, the slip angle and size of tire width can affect the rolling resistance value.
Authors and Affiliations
Ilham Habibi, Dedi Dwilaksana, Boy Arief Fachri
Keywords
Related Articles
- EP ID EP307147
- DOI 10.29303/dtm.v8i1.41
- Views 86
- Downloads 0
Pemanfaatan limbah piston bekas sebagai filler metal aluminium pada pengelasan oxy-acetylene
The abundance of waste piston used so far has not been utilized properly. Users of this piston waste can be used as an oxy-acetylene welder filler. Las oxy-acetylene has been widely used for welding on various types of a...
KAJIAN TEKNO EKONOMI UNIT ALAT PENCACAH PLASTIK UNTUK MENINGKATKAN NILAI JUAL SAMPAH PLASTIK: STUDI KASUS-UD. SARI PLASTIK LOMBOK TIMUR, NTB
Processing plastic waste in East Lombok mostly just collect plastic waste processing and then sent to the city in its original form. If the plastic waste is processed by applying plastic shredded units or chopper machine...
Pengaruh tebal kaca terhadap kinerja kolektor surya pelat datar dengan menggunakan absorber batu granit
This paper presents the experimental data of the use of granite stone as an absorber of the tested solar colecctor. The purpose of this study is to know the effect of the cover thickness of the collector. Three different...
KARAKTERSTIK SERAPAN SUARA KOMPOSIT POLYESTER BERPENGUAT SERAT TAPIS KELAPA
The purpose of this study is to investigate of sound absorption of coconut filter fiber composites. The research material made with coconut filter fiber as reinforcement and matrix resin unsaturated polyester (UPRs) type...
Unjuk kerja kulkas termoelektrik dengan rangkaian seri dan paralel pada beban air 1500 ml
Along with the increase of human mobility, the portable refrigerator becomes very important because it can be used to store goods or drinks to be durable or cooler. Therefore, a refrigerator using thermoelectric is an op...