ANALITIC INVESTIGATION OF THE REGULARITIES OF CHANGING DUST CONCENTRATION DURING THE ABRASIVE DECREASE OF STONE STRUCTURES
Journal Title: EUREKA: Physics and Engineering - Year 2018, Vol 0, Issue 2
Abstract
In the process of repair or restoration of building structures, it is often necessary to strengthen building structures from limestone-shell rock, concrete, reinforced concrete, hard materials-granite, basalt, etc. by cutting or making cuts of the required size with detachable circles of synthetic diamond and cubic boron nitride (CA and CBN) The cutting process is accompanied by considerable dust formation, which can be both harmful and dangerous factor in the work. The aim of the work is studying the process of dust sedimentation and the regularity of the change in dust concentration during the abrasive cutting of concrete and stone materials. Mathematical models have been developed – dust emission from under the wheel, speed of sedimentation of dust particles depending on their material, size and shape, and also depending on temperature, pressure and humidity, the concentration of dust in the working space and the concentration change during the cutting cycle are calculated. It is shown that the velocity of the sedimentation of particles depends significantly on the shape. The higher the sphericity, the higher the sedimentation rate. The ambient temperature has little effect on the sedimentation rate, in the temperature range (-20 → + 40 °C) at which the operation takes place. The sedimentation rate of dust particles generated by cutting the most common building stone materials also differs slightly. Almost the same sedimentation rate has dust particles obtained by cutting basalt and concrete. A bit higher is the sedimentation rate of particles from granite. The sedimentation rate of particles of generated dust is about 600-700 cm/h or 10-11 cm/min for particles measuring 6 μm. This means that at a production height of about 2 m (200 cm) during the operating cycle (about 3 min), the dust will remain at an altitude of about 1.5 m, i.е. practically remains in the working area. This gives grounds to assert about a high concentration of dust during the cutting cycle (about 4.8 108/m3).
Authors and Affiliations
Alla Bezpalova, Vladimir Lebedev, Yuri Morozov
Keywords
Related Articles
- EP ID EP669013
- DOI 10.21303/2461-4262.2018.00584
- Views 289
- Downloads 0
EXPLANATION OF THE ALGORITHMS FOR DISPLAYING 3D FIGURES ON THE COMPUTER SCREEN
Not long time ago people can only dream about the thing that they can see 3-dimensional world inside of the screen of the computer. Computers at that time can display only 256 colors on their screens, they can work only...
APPLICATION OF INFORMATION TECHNOLOGIES FOR MANAGEMENT OF LOGISTIC FLOWS
The process of managing logistics flows is one of the main factors influencing the increase of economic efficiency of production and sales. The development of logistics information systems is a broad niche in the IT fie...
METHODOLOGICAL APPROACH TO THE HUMAN RESOURCE MANAGEMENT IN VIRTUAL ORGANIZATIONS
In each organization, the goal of human resource management (HRM) is to form, employ and develop human resources. The massive spread of Internet technologies and the globalization of the economy in the late twentieth cen...
METHOD OF DETERMINING WEIGHTS OF TEMPORAL RULES IN MARKOV LOGIC NETWORK FOR BUILDING KNOWLEDGE BASE IN INFORMATION CONTROL SYSTEMS
The problem of constructing and expanding the temporal knowledge base for the information-control system is considered. This knowledge base is formally represented by the Markov logic network. It is shown that the behavi...
EFFICIENCY EVALUATION OF IMPLEMENTATION OF OPTIMIZATION METHODS OF OPERATION MODES OF THE "PLAST - GAS PIPELINE" SYSTEM BY THE METHODS OF MATHEMATICAL MODELING
To date, Ukraine's mature gas fields, which are being developed in the gas regime, are at the final stage of development, which is characterized by a significant depletion of reservoir energy. The final stage of developm...