АНАЛІЗ ГРАНИЧНИХ УМОВ ПРАЦЕЗДАТНОСТІ ВИМІРЮВАЛЬНИХ ПЕРЕТВОРЮВАЧІВ ІМІТАНСУ НА БАЗІ ОПЕРАЦІЙНИХ ПІДСИЛЮВАЧІВ
Journal Title: Вимірювальна техніка та метрологія - Year 2016, Vol 1, Issue 77
Abstract
Development of specialized portable measurement tools for impedance spectroscopy is quite challenging and up-to-date technical task. Portable impedance analyzers are required to satisfy certain criteria among which the most important are the following: stability of metrological characteristics of measurement channel over a wide frequency range, high dynamics, fast frequency sweep and the probe signal with appropriate step as well as high resolution of impedance/admittance measurement results. Autobalancing circuits are widely used in impedance analyzers design. However, their applications is followed by some problems related to operation stability caused by global feedback loop. The aim of the paper is to study the stability of the active measurements converter based on autobalancing circuits as well as determining their operation limits. The article shows the place and role of active measuring converters immitance-voltage in the structure of the frequency analyzer. Formal models of active converters were used to analyses operational limits related to system stability. The main results of research can be summarized as following: – To determine operating frequency range of the autobalancing circuit can successfully convert impedance to voltage, following rule have been formulated. The upper limit of the frequency range should be taken at least ten times smaller than operational amplifier bandwidth. The lower limit is formally unlimited. – Circuit operational limits related to system stability depends on relation of operational amplifier bandwidth to closed-loop knee frequency as well as relation of closed-loop knee frequency to operational circuit time constant (product of reference resistor to input capacitance). – The system is considered to be operating at normal conditions if relation of operational amplifier output resistance to reference resistance is equal or smaller then one. If the ratio excides this threshold, then measurement circuit will lose amplification properties at high frequency.
Authors and Affiliations
Роман Івах, Волоимир Хома, Юрій Хома, Іван Питель
Keywords
Related Articles
- EP ID EP181605
- DOI -
- Views 151
- Downloads 0
КІБЕРФІЗИЧНІ СИСТЕМИ ТА ЇХ ПРОГРАМНЕ ЗАБЕЗПЕЧЕННЯ
In connection with the enhanced development of cyber-physical systems, considerable attention in the world is given to various aspects of their formation and operation. So in 2014, NIST, USA has created a Cyber-Physical...
ОПЕРАТИВНИЙ КОНТРОЛЬ ЯКОСТІ ОВОЧІВ ЗА ЕЛЕКТРИЧНИМИ ХАРАКТЕРИСТИКАМИ
Vegetables’ pollution by mercury, copper, zinc and arsenic concerning the EU standards is not permitted, whereas in Ukraine it has to be within the limits of permissible concentrations. The urgent task is t...
Нові гідробіологічні показники якості для питної води, як харчового продукту номер один
In the article the analysis of modern standards of safe descriptions of drinking-water is done in Ukrain, and in the economic developed countries. On the base of literary review the new hydrobiological indexes of quality...
Дослідження термоелектричного матеріалу ZrNi1-xFexSn
The temperature and concentration dependencies of resistivity, thermopower, magnetic susceptibility and also power descriptions of ZrNi1-xFexSn semiconductor in ranges, T = 80 ¸ 380 K and x = 0 ¸ 0,20, respectively were...
ДОСЛІДЖЕННЯ РУЙНУВАННЯ СТАЛІ В СІРКОВОДНЕВИХ СЕРЕДОВИЩАХ
The parameters of the state and criteria of strength for research of terms of steel destruction in sulphuretted hydrogen environments taking into account characteristics of interface layer are presented.