Analiza drgań ogólnych i miejscowych na stanowisku pracy operatora specjalistycznej maszyny drogowej
Journal Title: Autobusy. Technika, Eksploatacja, Systemy Transportowe - Year 2019, Vol 227, Issue 1
Abstract
The article discusses an attempt to evaluate the ergonomic vibration environment of selected technical sources used in various technological processes. The scope of the tests included measurement of general vibrations in the plane of the seat carrier and local vibrations occurring on the steering wheel of selected technical sources. The tests were carried out in two trucks and in a vibratory road roller. The measurements were carried out in 10 repetitions for each technical measure. On the basis of the obtained measurements, the mean value of vibration acceleration, effective vibration acceleration and peak vibration acceleration as well as the weighted vibration acceleration value were determined. The obtained results were confronted with the applicable standards. It was noted that the daily vibration exposure of general action in the case of road roll works in the horizontal direction was 1,11 m∙s-2 and exceeded the limit values for men and women in the working age. In the case of other vehicles tested, there was no exceedance of the permissible mechanical vibration value in any of the analyzed directions and do not pose a threat to the employee.
Authors and Affiliations
Paweł Kiełbasa, Tomasz Dróżdż, Dominika Wojtas
Keywords
Related Articles
- EP ID EP581211
- DOI 10.24136/atest.2019.051
- Views 44
- Downloads 0
Analiza rynku elektrycznych pojazdów miejskich
Vehicle manufacturers have been looking for a replacement to internal combustion engines for years. One solution is to use a fully electric propulsion system. It is associated with many advantages such as limited emissiv...
Analiza wskaźników termodynamicznych w autorskim silniku spalinowym
W ramach pracy wykorzystano drogę tłoka wygenerowaną w symulacji dynamicznej w programie AutodeskInventor do badania procesów zachodzących podczas procesu spalania. Symulację przeprowadzono w programie AVL Fire dla jedna...
Stanowisko do badania wytrzymałości konstrukcji nośnej pojazdów, zgodnie z wymaganiami zawartymi w Regulaminie EKG ONZ nr 66
W artykule omówione zostało stanowisko do badania wytrzymałości konstrukcji nośnej pojazdów pasażerskich – głównie autobusów, zgodnie z wymaganiami zawartymi w Regulaminie EKG ONZ nr 66
Skutki ekologiczne dla mórz i oceanów wybranych zagrożeń i zdarzeń wypadkowych
Paper discussed the problem of chosen accidents at sea leading to different environment threats of sea, land and atmosphere. On the base of elaborates and reports carried out through marine environment protection organiz...
Analiza konstrukcji wózków kanałowych : przykładowy projekt
The paper presents the analysis of construction solutions of canal trolleys used in car workshops. It allowed to determine the most advantageous features of their features. Thanks to this, a lifting model was proposed, w...