Analiza procesu tłoczenia blachy za pomocą elastycznego stempla
Journal Title: Autobusy. Technika, Eksploatacja, Systemy Transportowe - Year 2017, Vol 208, Issue 6
Abstract
Forming temperature is one of the basic parameters of warm sheet metal forming. The elevated temperature reduces the deformation resistance and affects the susceptibility of the material to forming. In the investigations which results are presented in the article, an attempt was made to modify the forming process the bearing housing of fan engine. The housing is made of hardly-deformable stainless steel AMS5604. This material has low formability margin, and therefore, it is necessary to use non-conventional two-stage forming process: forming of preliminary shape in rubber-pad forming process and calibration of final shape at elevated temperature using a metallic dies. The paper presents also the results of metallographic analysis and chemical composition of the sheet after forming.
Authors and Affiliations
Irena Nowotyńska, Tomasz Malinowski
Pomiar mocy elektrycznej w urządzeniach mobilnych
The article discusses the problem of measuring of electrical power in mobile applications, including electrically powered vehicles. Discusses ways to measure power at the different types of voltage and current waveforms....
Śródlądowe terminale LNG i ich możliwa lokalizacja na rzece Odrze
The article discusses the problem of determining the location of inland liquefied natural gas (LNG) terminals on the Oder River. The article shows the main legal regulations concerning the development of the infrastructu...
Wybrane zagadnienia związane z transpozycją do polskiego porządku prawnego dyrektywy 2014/94/UE z dnia 22 października 2014 r. w sprawie rozwoju infrastruktury paliw alternatywnych
The paper aims to present selected issues of transposition into the Polish legal order of the Directive 2014/94/EU on the deployment of alternative fuels infrastructure. The article presents the systematics of the Direct...
Analiza wskaźników termodynamicznych w autorskim silniku spalinowym
W ramach pracy wykorzystano drogę tłoka wygenerowaną w symulacji dynamicznej w programie AutodeskInventor do badania procesów zachodzących podczas procesu spalania. Symulację przeprowadzono w programie AVL Fire dla jedna...
Polerowanie elektrochemiczne wybranych stali
The AISI 316Ti (EN 1.4571) austenitic stainless steel sample (50 × 30 × 1,5 mm) was used for the study. The main elements forming the steel are: chromium (16-18%), molybdenum (2.0-3.0%), nickel (10.0-14.0%), titanium (ma...