ANALYSING THE PEEL STRENGTH OF FUSIBLE INTERLINING USED IN WOOL FABRIC WITH ELASTANE
Journal Title: Annals of the University of Oradea. Fascicle of Textiles, Leatherwork - Year 2016, Vol 0, Issue 1
Abstract
Fusibles are used to improve the aesthetic and performance characteristics of wool fabrics. The peel strength of fused composites determines the durability of the pressing operation and they are influenced from the process conditions, the characteristics of fusible interlining and the fabric to whom they are sticked to. In this study, it was aimed to analyze the effect of fusible type and process conditions, weave type and different elastane compositions on peel strength. To this aim, two fusible types combined with eight different types of wool fabrics having different amount of elastane were studied. It was found out that only the fusible type and the process conditions are confirmed statistically that they influence the peel strength values. Nonetheless, it was observed as the elastane composition increased, the peel strength values tend to increase for twill type of fabrics and tend to decrease for plain type of fabrics. Moreover, the influence of composition may be in different direction when different type of Fusibles is used to form fusible composites. In conclusion, it can be stated that the dominant mechanism in determination of the peel strength is the selection of fusible type and suitable process conditions for this fusible type and more investigations are necessary if the composition of the material is also influential on the peel strength because of its compatibility with the fusible interlining.
Authors and Affiliations
Canan SARICAM, Fatma KALAOGLU
Keywords
Related Articles
- EP ID EP229464
- DOI -
- Views 98
- Downloads 0
INVESTIGATING PROCESS WATER PROPERTIES FROM DIFFERENT LEATHER INDUSTRY ZONES OF TURKEY
All the physical and chemical processes in leather production from soaking till dyeing-fatliquoring stages take place in water as medium. Water is also used as carrier for the chemicals in subsequent finishing processes....
A NEW 3D DESIGN METHOD FOR FOOTWEAR SOLES USING DELCAM PowerSHAPE-e SYSTEM
Design methods of soles and soles injection moulds must be accurate, timely and at the same time, accessible to a wide category of soles and injection moulds designers and manufacturers. For designing soles and injection...
SMART BIOCONVERSION OF PELT WASTE FROM TANNERIES
The area of interest is the synthesis and study of properties of new types of hydrogels made from pelt waste, in order to recover waste from tanneries. Leather processing in tanneries results in about 500-600 kg of pelt...
FUNCTIONAL TEXTILES BY APPLYING OF BIOLOGICALLY ACTIVE COMPOUNDS: REVIEW
In the last years the cosmetic industry using plant derivatives grow significantly for whole domains in which activates. Essentials oils and plant extracts are assumed to be ecologically sound and there is generally an a...
THERMAL CONDUCTIVITY OF CHICKEN FEATHER AND PUMICE STONE REINFORCED THERMOPLASTIC COMPOSITE MATERIALS
Natural fibres are green materials and have some advantages i.e. are renewable, reasonably cheap, biodegradable and ecologically freindly. Conversely, composites made of natural fibers can be used as a reinforcement mate...