Analysis and Countermeasures for EMU Traction Motor Stator Insulation Faults
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 2
Abstract
[Objective] To ensure the reliability of the stator insulation in EMU (electric multiple unit) traction motors during stator manufacturing or maintenance, it is necessary to conduct tests such as ground insulation withstand voltage, interphase withstand voltage, and coil-to-coil insulation withstand voltage to screen for defects of stator-to-ground insulation, interphase insulation, and coil-to-coil insulation. Therefore, an analysis of stator insulation faults in traction motors is required, and corresponding countermeasures are proposed. [Method] The fault characteristics and causes of ground insulation breakdown, interphase short circuit, and non-coinciding waveform attenuation in coil-to-coil insulation are introduced. Corresponding improvement measures and stator repair methods for these faults are analyzed. [Result & Conclusion] After repair, the stator of traction motor successfully passes the screening tests for ground insulation withstand voltage, interphase withstand voltage, and coil-to-coil insulation withstand voltage, and the test results demonstrate that the analyzed fault causes can accurately diagnose stator insulation faults, and the formulated improvement measures effectively resolve stator insulation issues.
Authors and Affiliations
Chunlong NA, Hui PENG, Yulong WANG
Keywords
Related Articles
- EP ID EP730109
- DOI 10.16037/j.1007-869x.2024.02.044
- Views 46
- Downloads 0
On-line Monitoring Method for Metro Vehicle Braking Resistor Temperature without Temperature Sensor
Objective To achieve real-time temperature monitoring of BR (braking resistor) in metro vehicles without temperature sensor, a new temperature estimation method for this purpose without additional sensors is proposed. Me...
Empirical Research on Urban Rail Transit and Urban Economic Low-carbon Transformation
[Objective] Urban rail transit system is an important part of modern urban economy. To better realize the low-carbon transformation of urban economy, attention should be given to the impact of urban rail transit system o...
Intelligent Health Management System for Rail Transit Signaling System Power Supply
Objective The dual-bus and dual-interruptible power supply (UPS) architecture in rail transit signaling system power supply enhances the system redundancy but does not effectively reduce component failure rates. To impro...
Mechanism Analysis and Simulation Study of Closing Overvoltage Fault in EMU Circuit Breaker
Objective The overvoltage caused by circuit breaker closing will aggravate the insulation aging of high voltage equipment when EMU (electric multiple units)passes neutral section. The research on the mechanism and influe...
Research on the Train Surface Pressure Characteristics in Passing through Tunnels at Speeds of 400 km/h and above
［Objective］ In order to ensure the running safety of trains with a speed of 400 km/h and above when passing through tunnels and improve the passenger ride comfort, it is necessary to adopt the numerical simulation meth...