Analysis and Design of Hemispherical Head Pressure Vessel
Journal Title: Afyon Kocatepe Üniversitesi Uluslararası Mühendislik Teknolojileri ve Uygulamalı Bilimler Dergisi - Year 2019, Vol 2, Issue 1
Abstract
In this study, a hemispherical head with pad reinforced central nozzle opening that subjected to uniform internal pressure was investigated using Finite Element Methods (FEM) to understand the design procedure. This procedure is handled according to the ASME Boiler and Pressure Vessel Code Section VIII Division 2. This standard contains two parts for the design of pressure vessels, the first part is Design by rules and the second part is Design by analysis. With reference to the ASME standard, axisymmetric finite element models for Elastic, Limit Load and Elastic-Plastic Analysis are used to demonstrate protection against plastic collapse and local failure. Maximum allowable pressures are obtained in accordance with the mentioned design methods and discussed. According to the elastic and limit load analysis methods, obtained plastic collapse results are very close. Besides, the elastic analysis method is observed to be more conservative than the Elastic-Plastic method regarding the evaluation of plastic collapse. On the other hand, for the local failure results, Elastic-Plastic Analysis is observed to be slightly conservative than the Elastic Analysis.
Authors and Affiliations
Garip GENÇ, Hasan Huseyin Huseyin OZKAN, Safa OZHAN
Keywords
Related Articles
- EP ID EP565538
- DOI -
- Views 60
- Downloads 0
Specific Features Of Iron Ore Of Lisakovski Deposit
The article presents the results of laboratory studies of the enrichment of oolitic ores of the Lisakovski deposit by the method of magnetic separation.The results of morphometric analysis and the study of the quality of...
Agro Waste Reinforced Composites: A Solution For Sustainable Environment
Agro- wastes or agricultural wastes are the residuals obtained when raw agriculture products are grown and processed. The agriculture products include vegetable, fruits, , meat, crops, poultry and dairy products. Its dif...
Solid And Biological Wastes Production Of Electricity
In recent years, the population of our country has increased significantly. Following this rise, both the shelter and the energy needs of the factories have seen a big rise. In our country where energy requirements are m...
BACTERIAL LEACHING OF COPPER FROM WASTE OF ENRICHMENT OF COPPER ORE
In poor and complex ores processing thousands and even millions tons of valuable metals are lost in the waste form. Bacterial leaching of metals reduces these losses. The basis of this process is made by oxidation of the...
Comparison of flexural properties of luffa and jute fibers
In this study, the mechanical properties of bio-composite materials produced by using plant-based fibers compared. Luffa fiber and jute were used as reinforcement in the production of these biocomposite samples. To able...