Analysis and Improvement of Pantograph Carbon Strip Abnormal Wear on Luoyang Metro Line 1
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 6
Abstract
Objective During inspection, problems like the bad pantograph and catenary relation, pantograph-catenary arcing on the main line, burning points and serious wear on the pantograph carbon strip are detected since the trial operation of Luoyang Metro Line 1. In order to solve the abnormal wear of pantograph carbon strip, it is necessary to study the causes and put forward solutions. Method The influence of the technical performance of the pantograph catenary, carbon strip material, the pantograph catenary grinding, contact pressure, external climate environment temperature and humidity on the pantograph catenary wear is mainly discussed. The influencing factors and the pattern of the pantograph catenary abnormal wear is examined. Result & Conclusion The research results show that the pantograph carbon strip wear on Luoyang Metro Line 1 is of central partial wear type. In order to solve such wear problems, targeted treatment measures and prevention suggestions are proposed, including establishing special accounts for catenary and pantograph, drawing on experiences of the peers in dealing with abnormal wear of the pantograph catenary, optimizing the maintenance mode according to the wear condition of the pantograph catenary, and making full use of information testing equipment such as the pantograph catenary inspection shed to improve the efficiency of monitoring and adjusting the technical parameters for pantograph catenary.
Authors and Affiliations
Liang WANG, Xiurong NIU, Min LUO
Keywords
Related Articles
- EP ID EP737781
- DOI 10.16037/j.1007-869x.2024.06.052
- Views 52
- Downloads 1
Development of Short-Circuit Impedance Testing and Setting Calculation Device for Urban Rail Transit Catenary
Objective The line impedance of urban rail transit catenary is significantly affected by many factors such as wire material, line length, surrounding environment, etc., resulting in significant impedance differences betw...
Influence of Shield Launching and Receiving on Working Shaft Retaining Structure
[Objective] Generally, shield machines are launched or received after completing the construction of shield working shaft main structure. However, due to various constraints, considering SLR (shield launching and receivi...
Detection System Design and Implementation for Foreign Objects in Automatic Platform Door Gap
Objective The detection of foreign objects in platform door gap is critical to metro operational safety. Therefore, it is essential to develop a new anti-clamping detection system for metro platform door, enhancing the s...
Renovation Scheme of TCM100 Track Circuit
［Objective］ The initial application of TCM100 track circuit in China is in Shenzhen Metro Line 4 and Guangzhou Metro Line 8. During the early stage of equipment maintenance and repair, certain drawbacks in the power su...
Simulation Analysis of Air Distribution in the Public Area of Single-Span Arch-Shaped Underground Station under the Centralized Air Return Mode
［Objective］ Due to the relatively high floor height and the special structural form of arched top plates, the single-span arch-shaped underground station poses higher requirements for decoration. Therefore, it is neces...