ANALYSIS AND OPTIMIZATION OF FRICTION WELDING PARAMETERS FOR AA6061-AA2014 DISSIMILAR JOINTS
Journal Title: JOURNAL OF ADVANCES IN CHEMISTRY - Year 2017, Vol 13, Issue 6
Abstract
Friction welding is a solid state welding used owing to its properties such as low heat input, high production efficiency and environment friendliness. Materials which aredifficult towelded by fusion welding processes can be successfully done friction welding. In this work, an effort was made to predict the maximum tensile strength of friction welded AA 6061 and AA 2014 aluminium alloy dissimilar joints incorporating the process parameters such as rotational speed, friction pressure and forging pressures which have immense on the strength of joints. The friction welding process parameters were optimized to achieve maximum tensile strength of the joint. The maximum tensile strength of 210MPa  for the joints fabricated under the welding conditions ofrotational speed 1508 rpm, friction pressure of 8.16 MPa/secand forging pressure of 6.79 MPa/sec using the optimization techniques.
Authors and Affiliations
K. Mathi, G. R. Jinu
Keywords
Related Articles
- EP ID EP653098
- DOI 10.24297/jac.v13i6.5768
- Views 135
- Downloads 0
Conservative liquids based on synthetic petroleum acids salts and aliphatic nitro-compounds
Synthetic oil acids (SOA) salts and nitroderivatives of high olefins C14 as oil-soluble corrosion inhibitors for mild steel in various mediums was synthesized. On the bases of turbine oil T-30 was prepared composition of...
Performances of nanofiltration on industrial phosphoric acid purification
Phosphoric acid production is of major importance to the Tunisian economy. However, the quality produced is not suitable for other than agricultural use due to mineral and organic impurities. In this study, the purificat...
Design of Internet Controlled Switch Box using IoT
IoT (Internet of things) is a developing technique that is more useful to control or monitor the appliances via internet. Existing appliances can be connected to WIFI network and to internet with the help of ESP8266 micr...
Novel removal of Anthracene from oil-contaminated water by synthesized modified magnetic nano-particles
Novel magnetic nanoparticles (MNPs) modified with (3-mercaptopropyl)-trimethoxysilane (MPTMS), grafted with allyl glycidyl ether and coupled with beta naphthol, were prepared for removal of anthracene in aqueous solution...
Transesterification of Waste Cooking Oil Catalysed by Crystalline Copper Doped Zinc Oxide Nanocatalyst
Biodiesel has its unique position in the field of renewable energy as alternate fuel to diesel due to fuel price, energy requirement and petroleum crisis. In this study, biodiesel was produced from Waste Cooking Oil (WCO...