Analysis and Simulation of Flat Plate Laminar Boundary Layer
Journal Title: International Journal of Modern Research In Engineering & Management. - Year 2018, Vol 1, Issue 9
Abstract
In this paper, an analysis was done on laminar boundary layer over a flat plate. The analysis was performed by changing the Reynolds number. The Reynolds number was changed by changing horizontal distance of the flat plate. Since other quantities were fixed, the Reynolds number increased with increment of horizontal distance. Iterations were increased in scaled residuals whenever the Reynolds number was increased. Maximum value of velocity contour decreased with the increment of the Reynolds number. The value of the largest region of velocity contour decreased with the increment of the value of the Reynolds number and it also affected the appearance of contour. The value of pressure contour increased with the increment of the Reynolds number. Vertical distance versus velocity graph was not depended on the Reynolds number. In this graph, the velocity increased rapidly with the increment of vertical distance for a certain period. After that, the velocity decreased slightly with the increment of vertical distance. Finally, the velocity became around 1.05 m/s.
Authors and Affiliations
Farzad Hossain
Keywords
Related Articles
- EP ID EP408418
- DOI -
- Views 147
- Downloads 0
An Evaluation of The Influence of Corn Cob Ash (CCA) on The Strength Parameters of Bentonite Clay
It is of major reflection to with clear geotechnical investigation results. There are many methods for improvement of soil which include a variety of procedures like excavation and refilling of grouting, nailing etc. The...
Implementation of Social Networks as a Digital Communication Tool in Social Supermarkets
The main purpose of social supermarkets is to serve to customers, which are in material deprivation. As nonprofit organizations, they perform several business activities on everyday basis. Those activities include: (1) c...
Utilizing Building Information Modeling to Create Site Safety and Construction Project Coordination Efficiency
----------------------------------------------------ABSTRACT------------------------------------------------------ The use of Building Information Modeling (BIM) has significantly improved building planning and enhanced...
Reactivity Feedback Effect on the Reactor Behaviour during SBLOCA in a 4-loop PWR Westinghouse Design
The reactivity coefficient is a very important parameter for safety and Stability of reactors operation. To provide the safety analysis of the reactor, the calculation of changes in reactivity caused by temperature is ne...
Remote Sensing Method for Flood Management System
Flood occurred when heavy and continuous rainfall exceeding the absorptive capacity of soil and the flow capacity of rivers, streams, and coastal areas. Land areas that are most subjected to floods are areas situated adj...