Analysis Of Electric Propulsion Performance On Submersible 60 M With Motor Dc 2x1850 Kw 380 V Using Ohmformer At Voltage 190 Vdc 10260 Ah And Without Using Ohmformer At Voltage 115 Vdc 10260 Ah

Abstract

Electric propulsion system is ship propulsion system using electric motor to replace performance of main engine. Submersible ships use DC motor as electric propulsion system because DC motor has advantages of speed control and lower propulsion noise when submersible ship is at submerge condition. Design of electric propulsion system is using two DC motor that are connected in series. Battery and generator as its power supply. Designs of electric propulsion system that will be reviewed here are using ohmformer and without using ohmformer. Those designs will be simulated using MATLAB Simulink. The results of the simulation are that the design using ohmformer is greater in speed and power than without using ohmformer. Because of using ohmformer can control input voltage of DC motor that use generator as its power supply. Meanwhile, ohmformer-less design has constant input voltage that use battery as its power supply. Next, design of using ohmformer can be used for silent run (low speed), sailing run (medium speed) and quick run (high speed). Then design of without using ohmformer can be used for sailing run (medium speed).

Authors and Affiliations

Sardono Sarwito, Muhammad Agus Sulaiman

Keywords

Related Articles

Performance Analysis Rim Driven Propeller as a Propulsor using Open Water Test

The use of duct in propeller is one of the breakthrough in the development of the propeller. Ducting not only claimed to be increasing efficiency of the propeller, but also capable to protect the propeller from impact th...

Validation of Engine Performance for Tests on Ballast Water Heat Treatment Using Engine Waste Heat

Heat treatment has been considered as a suitable option for treatment of ballast water. Utilizing the waste heat from the diesel engine fresh water and exhaust gases would be an economic option. For recovering the heat f...

Design of Air Ventilation System for Cargo Hold Vessels Using Solar Desiccant

One of the facilities and infrastructure of the vessel is the ventilation system in the cargo hold to maintain the quality. One attempt to avoid high moisture ratios is to provide a dry air supply by using desiccants. Th...

Evacuation Analysis of 1200 GT Passenger Ship in Case of Fire using Agent-Based Modeling Approach

This study discusses about safety on board especially during fire condition. During fire, all passengers and crew had to beevacuated into safe place. The study observe at 1200 GT passenger ships, a typical ship which hav...

Development of Marine and Coastal Tourism Based on Blue Economy

Marine and coastal tourism as one of the largest segments of the maritime economy sector, as well as the largest component of the tourism industry, often leads to controversy over environmental impact and compatibilit...

Download PDF file
  • EP ID EP335399
  • DOI 10.12962/j25481479.v2i3.3445
  • Views 214
  • Downloads 0

How To Cite

Sardono Sarwito, Muhammad Agus Sulaiman (2018). Analysis Of Electric Propulsion Performance On Submersible 60 M With Motor Dc 2x1850 Kw 380 V Using Ohmformer At Voltage 190 Vdc 10260 Ah And Without Using Ohmformer At Voltage 115 Vdc 10260 Ah. International Journal of Marine Engineering Innovation and Research, 2(3), 190-198. https://europub.co.uk/articles/-A-335399