ANALYSIS OF ELECTROMAGNETIC VIBRATION FORCES IN THE ELEMENTS OF THE TURBOGENERATOR STATOR FASTENING TO THE CASE IN NON-NOMINAL OPERATION MODES
Journal Title: Електротехніка і Електромеханіка - Year 2018, Vol 0, Issue 5
Abstract
Purpose. The purpose of the paper is to determine the value of additional electromagnetic forces (EMF) that are created by the fluxes of scattering of the back of the turbogenerator (TG) stator core in the elements of its fastening to the case when operating in non-nominal modes according to the vibration control data. Methodology. The paper used the theory of electromagnetic fields, the method of polynomial approximation, mathematical modeling in the MathCAD-2000 professional package and the provisions of the general theory of electrical machines. Results. Analytical and numerical calculations of additional EMF values are performed, which were created by the leakage fluxes of the back of the stator core in the elements of fastening of the TG to the case when operating in non-nominal modes, which is determined by the need for night unloading of the power system. The values of these TG forces are established with a change in the output and consumption of reactive power and with a change in voltage. Originality. For the first time for TGs operating in non-nominal modes, the estimation and calculation of additional EMF in the elements of the TG core fastening to the case are carried out, which are created by the leakage fluxes of the back of the stator core and supplement the action of the basic EMF. The definition of these forces is relevant, because turbogenerators of TPPs in Ukraine with a capacity of 200-300 MW are maneuvering capacities and solve the problem of maintaining the power factor of the power system. Practical value. It was found that if the TGs often operate in non-nominal modes, the wear of the stator core fastening systems to the case is more significant than in the case of their operation only in nominal modes. The obtained data will allow to more accurately determine the scope of repair work, draw up schedules for their implementation, determine the locations of the sensors for monitoring, and can be used at the design stage of new machines.
Authors and Affiliations
V. V. Shevchenko, A. N. Minko, A. V. Strokous
Keywords
Related Articles
- EP ID EP494949
- DOI 10.20998/2074-272X.2018.5.05
- Views 99
- Downloads 0
INCREASING CONTROL’S EFFICIENCY FOR THE SHIP’S TWO-MASS ELECTRIC DRIVE
Purpose. For shipboard lifting and transporting machinery (LTM) with AC thyristor electric drives (ED) the problem of minimizing sway through the formation of the special law to change the principle of ED control over th...
CALCULATION OF FIELDS AND CURRENTS IN THE INDUCTION SYSTEM WITH THE ATTRACTIVE SCREEN AND THE ADDITIONAL COIL AS A TOOL FOR THE STRAIGHTENING
In the idealization of the "limiting low" frequencies of acting fields the calculated dependences for the density of the induced currents and distributed force of the attractive in the induction system with attractive sc...
THE LAW OF ELECTROMAGNETIC FORCE
Calculation peculiarities for Lorentz force, Ampere force, interaction of parallel electric currents, and the moment of electrical machines are analyzed. They have exceptions on application, and they are the rules which...
ON THE PROBLEM OF INCREASING COMPUTATION ACCURACY FOR RATED PARAMETERS OF ACTIVE ELECTRICAL INSTALLATION GROUND GRIDS
In the paper, factors having effect on computation accuracy of ground grid rated parameters are analyzed. Directions and techniques for increasing the rated parameter computation accuracy are suggested. The techniques co...
AN ANTHOLOGY OF OUTSTANDING ACHIEVEMENTS IN SCIENCE AND TECHNOLOGY. PART 21: ARTIFICIAL INTELLIGENCE AND ROBOTICS
A brief essay on the history of invention of various-application robots and development of state-of-the-art robotics is given.