Analysis of Engine Propeller Matching of DC Motor as a Main Propulsion
Journal Title: International Journal of Marine Engineering Innovation and Research - Year 2017, Vol 2, Issue 1
Abstract
The development of ship always searches through the most benefits system for reducing costs of propulsion system without increase pollution. Diesel propulsion system or also known as conventional propulsion system is efficient but requires high operating costs and increase high level of marine pollution. Electrical propulsion system is using electric motors as the prime mover of the propeller. There are 2 types of electric motors that will be used for research of electric propulsion system, there are; DC motors and three-phases induction motor. As the use of DC motor as a prime mover for this electrical propulsion system, this study determines the characteristic between voltage terminal with torque and also field current with torque. It results that torque produced by the DC motor is in the same magnitude with the speed (RPM). The higher the speed have shaped the value of the torque. The input and terminal voltages adjusts all variables and results. In this study, different field voltage creates different pattern of motor envelope. Its manner to propeller curve occurs total different results. With field voltage of 50 V, the ranges of motor envelope immoveable in the point of 150% of present speed and 160%. While field voltage of 60 V serves larger ranges of motor envelope which possible to reach further than 50 V curve.
Authors and Affiliations
Eddy Setyo Koenhardono, Juniarko Prananda, Ekaprana Danian
Keywords
Related Articles
- EP ID EP247656
- DOI 10.12962/j25481479.v2i1.2702
- Views 228
- Downloads 0
Technical-Economic Analysis of Photovoltaik Reverse Osmosis Planning for Fulfillment of Fresh Water System on Ro-Pax Ship
The need for fresh water in the world of industry is increasing with the rapid development of the global industry. The shipping industry is having a significant impact as part of a global industry concerning the sector o...
Technical Analysis Ballast Water Treatment By Using Economizer Utilizing Main Engines Exhaust Heat To Comply With International Ship Ballast Water Management At Mv. Leader Win
Based on the International Ballast Water Management regulations (IBWM), waste water ballast itself has the attention of some researchers to reduce the amount of waste species present in the ballast water with a variety o...
Risk Based Inspection of Gas-Cooling Heat Exchanger
On October 2013, Pertamina Hulu Energi Offshore North West Java (PHE – ONWJ) platform personnel found 93 leaking tubes locations in the finfan coolers/ gas-cooling heat exchanger. After analysis had been performed, the c...
Experimental Study of Thermoelectric Generator as Electrical Source of Impressed Current Cathodic Protection for Ship Hull
Impressed Current Cathodic Protection (ICCP) is a method to protect metallic material such as ship hull from corrosion by using electric current. In this research, a prototype of thermoelectric generator is developed in...
Study on Improvement of Indonesia Shipbuilding Productivity with Theory of Constraints
Indonesia is a big country having big population, huge area and huge Exclusive Economic Zone area. For world harmonized growth, it is quite important to realize steady economy growth on Indonesia. Growth of Indonesia’s s...