ANALYSIS OF INFLUENCE OF MAIN TYPES OF DEFECTS AND DAMAGE ON THE BEARING CAPASITY OF REINFORCED CONCRETE ELEMENTS
Journal Title: Вісник Національного університету "Львівська політехніка". Серія "Теорія та практика будівництва" - Year 2018, Vol 0, Issue 888
Abstract
In nowadays economic trends, there is a need in changes in the usage of buildings and structures. This usually leads to the changes loading and character of the loadings type on the building structures, with the subsequent need to assess the technical condition and the replacement or enhancement of certain elements. Also, objects, which need the reconstruction in order to be reequipped or changed it functionality, that have designs which were used under the influence of an aggressive environment or other factors which were not taken into account. This increases the difficulty of the rating of the technical condition of individual constructions and further reconstruction. An important place in the possibility of reconstruction of buildings and structures is determining to the residual bearing capacity of the elements. This is especially true for reinforced concrete elements widely used on the territory of Ukraine. An important aspect of determining the residual ability of bending reinforced concrete elements is the study of the effect of defects and damage on the changes in strength and deformation ability of the element. As reinforced concrete is a complex composite material, the determining of impact and predicting the effects on it of various types of defects and damage is a rather difficult task. This mainly concerns the combination of various defects and damage, which increases the variability of the various internal and external factors in the calculation and further formation of the methodology of determining the impact. Therefore, this issue is not completely solved and requires further researching. In the article, the researches of influence of defects and damages on residual bearing ability of damaged reinforced concrete elements with accentuation on bending reinforced concrete beams are analyzed. The main types of defects of reinforced concrete beams are the corrosion of the reinforcement, the reduced cross-sectional area, defects obtained in the manufacture, transportation and operation of structures With consideration of the action of various types of defects and damage and their certain combinations, which lead to changes in the characteristics of the strength and deformability of the element, and the possible change in the operation of the element.
Authors and Affiliations
M. Lobodanov, Pavlo Vegera, Zinoviy Blikharskyy
Keywords
Related Articles
- EP ID EP494701
- DOI -
- Views 104
- Downloads 0
Дослідження процесу остигання будівлі в умовах припинення теплопостачання
The article presents the theoretical calculations and the experimental research time cooling of the building in terms of existing heating systems during the cold season while to using periodic mode of heating, which is o...
ДЕФОРМАТИВНІСТЬ ВУЗЛІВ ДЕРЕВ’ЯНИХ КОНСТРУКЦІЙ НА З’ЄДНАННЯХ ТИПУ “СТАЛЬ-ДЕРЕВИНА”
Nowadays design of timber buildings and constructions growth up. It is connected with the dissemination of eco-technologies, efficient energy-saving buildings, rapid constructing, inexpensive solutions and addicting to s...
INFLUENCE OF THICKNESS OF CEMENT-GROUND BASES ON BEARING-CAPACITY OF CONCRETE ROAD SURFACES
Permanent increasing of loading on road surfaces requires a permanent increase their bearing capacity. In research paper presented experimental results of test specimens of concrete road surfaces on cement-sand bases. Th...
PROCESSES OF HEAT AND MASS TRANSFER IN GAS AND HEAT PROTECTIVE SUIT WITH ICE-WATER COLD-STORAGE ACCUMULATORS
The article dwells on the mathematical model of heat and mass transfer processes in „environment-protective clothing-human” system which takes into account simultaneous penetration of ambient heat and toxic chemicals in...
ЗБІРНІ КАРКАСИ БАГАТОПОВЕРХОВИХ БУДИНКІВ З НЕРЕГУЛЯРНОЮ СІТКОЮ І ЗМІННОЮ ВИСОТОЮ ПОВЕРХІВ
In the construction of multi-storey buildings for different purposes, for many previous decades mostly typical prefabricated frame with a regular grid of columns and a constant height a floors were used. Such typical pre...