Analysis of influence of technical features of a pidcontroller implementation on the dynamics of automated control system
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 3, Issue 2
Abstract
<p>Under conditions of intensification and maximization of production profitability, a problem of regulation, optimization and improvement of the structure of automatic control systems arises. To date, there are many topical problems associated with the practical implementation of the PID controller, e.g. unification of the PID controller structure, implementation of a differential component, integral saturation and nonimpact switching of parameters and operating modes.</p><p>Influence of nonlinearities, noise, disturbances, functions, and peculiarities of the PID controller on dynamics of the automatic control system was studied. It was shown that for the maximum efficiency of implementation of the PID controller for controlling inertial objects with a transportation lag, a complex approach must be applied: limiting the rate of growth of the target disturbance and conditional integration to eliminate integral saturation; simultaneous application of an exponential filter of the measured value and a differentiator with a low-cut filter to minimize the effect of noise and interferences on the transient processes; tracing the current state of the system allows one to prevent an "impact" when changing the operating modes of the PID controller; introduction of the controller insensitivity zone will potentially provide a longer operation life of the actuator.</p><p>Mathematical modeling of the system of automatic regulation of rarefaction in the boiler furnace was performed taking into account the proposed set of solutions. These recommendations enable implementation of a PID controller suitable for practical use taking into account stochasticity, nonlinearity, quasi-stationarity and limitations of the technological processes.</p><p>Integrated assessment and consideration of these problems will contribute to improving efficiency and reliability of equipment, reducing energy consumption and time to reach the set goal in the process of automatic regulation without changing the structure of the control system.</p>
Authors and Affiliations
Oleksandr Stepanets, Yurii Mariiash
Keywords
Related Articles
- EP ID EP527964
- DOI 10.15587/1729-4061.2018.132229
- Views 73
- Downloads 0
Development of an approach to mathematical description of imbalance in methabolic processes for its application in the medical diagnostic information system
<p>The problem of diagnosing the metabolic syndrome associated with disturbance of carbohydrate and lipid metabolism was considered in this work. A new approach to determination of imbalance of metabolic processes was pr...
Development of the procedure for forming nonstationary signal structures based on multicomponent LFM signals
<p>Noise protection of existing radio lines with noise-shaped signals and digital types of modulation was studied. Analysis has shown that the use of such signals in conditions of the radio-electronic conflict does not p...
An impact of the ladle lining on the refining of reinforced steel when blowing with powders
<p>When refining steel by blowing powders, the ladle lining material plays a serious role. The dependency graphs of the degree of desulfurization on the consumption of silicocalcium powder during blowing in ladles lined...
Synthesis of Ni(OH)2 by template homogeneous precipitation for application in the binderfree electrode of supercapacitor
Nickel hydroxide is widely used as the active material for hybrid supercapacitors. The most electrochemically active is α-Ni(OH)<sub>2</sub>, synthesized using template homogeneous precipitation. The disadvantage of temp...
Process of resources provision management of the enterprise's activity with consideration of gender factor
<p>The study of the process of resources provision management of enterprise activity taking into account the gender factor was conducted. It was determined that the present environment requires business entities to take...