Analysis of L-Histidinium Maleate (LHM) Characterization and Identification of Structural Arrangement
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
L-histidine maleate, another amino corrosive natural nonlinear optical material has been effectively developed from the fluid arrangement by moderate dissolvable dissipation technique. The developed gem was subjected to single precious stone X-beam diffraction consider for the recognizable proof of the basic game plan. The synthetic structure of the precious formed stone was evaluated by Energy dispersive X-beam examination. With a specific end goal to affirm the sub-atomic structure of the precious formed stone, FT-NMR unearthly investigation was done. The rate of optical transmittance by the developed gem was found out by UV–visible supernatural review. The nonlinear optical property of the formed material was recognized by the powder procedure of Kurtz and Perry. The HR-SEM examination demonstrates the surface morphology of the precious formed stone. The warm solidness of the extended precious stone was found by heated differential investigation.
Authors and Affiliations
J. A PRINCE
Keywords
Related Articles
- EP ID EP280265
- DOI 10.24247/ijmperdfeb201890
- Views 100
- Downloads 0
Investigation of Hot Corrosion Behaviour of Uncoated and WC-17co Coated Samples in Aggressive Molten Salt Environment
Hot corrosion is usually a significant issue in power plant’s boilers. The alloys and metals get corroded, once exposed to high temperature corrosion in air, or in actual boiler environment in power plants. In order to p...
An EPQ Model with Varying Rate of Deterioration and Mixed Demand Pattern
This paper derives the optimal cycle time and total cost of an EPQ model with a variable rate of deterioration and mixed demand pattern. Demand is inventory dependent during the inventory buildup time and constant demand...
Enhancement of Heat transfer in Shell and Tube Heat Exchanger by Using Nano Fluid
Heat transfer rate of TiO2 and water Nano fluids were measured in a shell and tube heat exchanger under the turbulent flow condition. Even with insignificant focus of Nano particles in the base fluids, results in enhance...
Thermal Analysis of Closed Loop Pulsating Heat Pipe
Recent advances in electronics design and manufacturing have resulted in significant increases in heat flux density through a miniaturization of components and a simultaneous increase in power requirements associated wit...
Experimental Investigation on Influence of Process Parameters in Selective Laser Sintering on Roundness Using Taguchi Medthod
Additive Manufacturing is emerging latest trends, in todays industrial needs. The 3D model is built by using the Catia V5 and exported to Rapid Prototyping machine where the file is saved by. stl extension and the file r...