Analysis of occurrence of guided disorders in selected railway equipment — impact of load on measurement results
Journal Title: Bulletin of the Military University of Technology - Year 2019, Vol 68, Issue 2
Abstract
The parameter of interfering signals, determining the type of coupling, is the disturbing frequency. For frequencies less than 30 MHz, main impact comes by conducted emissions. The article presents an analysis of the occurrence of disturbances and the impact of the load of the selected railway equipment’s on the measurement result of the conducted disturbances. Keywords: electromagnetic field, spectrum, interference, induction and capacitive coupling<br/><br/>
Authors and Affiliations
Kamil Białek, Jacek Paś
Keywords
Related Articles
- EP ID EP609368
- DOI 10.5604/01.3001.0013.3010
- Views 85
- Downloads 0
Inverted flight of the aircraft with high maneuverability
The paper presents major issues associated with maneuvering of the aircraft inverted flight (acrobatic). It was presented mathematical description for longitudinal balance of the airplane for inverted flight, in particul...
Stability analysis of steel compression members under shock loads
This paper presents the results of a numerical analysis of the elastic-plastic behaviour of steel compression members subjected to compression with a permanent pre-deformation in the longitudinal axis by a longitudinal i...
Security analysis of passcode mechanisms in Telegram and Viber
Telegram and Viber are the most popular mobile messengers nowadays. Unlike other products, such as WhatsApp or Facebook Messenger, these messengers allow their users to restrict access to messages stored on the device −...
Evaluation of time change of the Love k2 and k3 numbers using LAGEOS SLR data
In this paper, we present the estimated Love numbers for degree 2 and 3 (k2 and k3). The determination was based on the Satellite Laser Ranging (SLR) data of LAGEOS-1 and LAGEOS-2 satellites obtained within the period of...
Test of fatigue crack growth in welded specimens subjected to bending
The paper presents the test results on the fatigue crack growth under cyclic bending specimens at constant moment amplitude made of S355 steel with fillet welds. Plane specimens with stress concentrators in form of the e...