ANALYSIS OF PERFORMANCE OF THE NEW TYPE OF FOUR EQUAL OF THE INJECTION ONLINE PRESSURE SEALING FIXTURE
Journal Title: Topics in Chemical & Material Engineering (TCME) - Year 2018, Vol 1, Issue 1
Abstract
Taking the leakage of steel pipe welding neck flanges with raised face as the research object, the structural characteristics of the traditional fixture and new type of four equal fixture were investigated, and the mechanical properties of the traditional fixture and the new type of four equal fixture were analyzed by using the finite element software Abaqus. The results show that, in the case of the same internal uniform pressure applied to the two kinds of flanges, the maximum circumferential tensile stress and the maximum tensile stress of the bolt of the new type of four equal fixture is 42.2% and 42.9% for the traditional fixture, respectively. The new type of four equal fixture is superior to the traditional fixture in both pressure bearing capacity and stress concentration. Therefore, it is of great significance to investigate the mechanical properties and concept design of the new type of four equal fixture for the wide application of pressure sealing technology
Authors and Affiliations
Li Hao rong, Chen Qing, Hu Yi wei, Chen Yu fei
Keywords
Related Articles
- EP ID EP414581
- DOI 10.26480/icnmim.01.2018.250.253
- Views 26
- Downloads 0
DESIGN OF FLYING SHEAR DEVICE AND ALGORITHM BASED ON MOTION CONTROL SYSTEM
The flying shear device and algorithm design using the SIEMENS S7-300 series PLC SINAMIC SI20 motion controller and the motion control system based on the realization of the servo motor with high precision and high stabi...
APPLICATION OF AHP-ENTROPY METHOD AND LSSVM IN THE ASSESSMENT AND FORECASTING OF TRANSFORMER OPERATING STATUS
In order to meet the needs of fault troubleshooting, maintenance decision and on-line prediction, the method of the transformer health index based on AHP-entropy is proposed. The cross complex matter elements are establi...
EFFECT OF SINTERING TEMPERATURE AND TIME ON STRUCTURAL AND DIELECTRIC PROPERTIES OF TB-DOPED BATIO3 CERAMICS
Ba1−x/2Ti1−x/2TbxO3 (x = 0.05) ceramics (BTTb5) were prepared at Ts = 1400 °C for t = 6‒24 h and at Ts = 1300‒1480 °C for t = 24 h using the cold-pressing ceramic processing technique. All of BTTb5 ceramics satisfy EIA X...
ZCu10Sn2ZnFe1.5Co1 SOLUTION TREATMENT PROCESS AND ORGANIZAT IONAL PERFORMANCE RESEARCH
The In-situ iron nanoparticle reinforced ZCu10Sn2ZnFe1.5Co1 alloy was fabricated by centrifugal casting in vacuum chamber with a medium frequency electrical furnace. The processes of solid solution of ZCu10Sn2ZnFe1.5Co1...
COMPARISON STUDY ON THE CATALYSIS PERFORMANCE OF MCM-49 AND B ETA ZEOLITE ON THE TRANSALKYLATION OF PIPB
Zeolite MCM-49 and Beta were synthesized by dynamic hydrothermal method, which were characterized by different techniques, such as XRD, SEM, N2 adsorption-desorption and NH3-TPD. The catalyst performance of MCM-49 and Be...