Analysis of possibilities for improving energy indicators of induction electric motors for propulsion complexes of autonomous floating vehicles
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 2, Issue 8
Abstract
<p>This study proposes additional possibilities to improve, at minimal efforts, a number of technical-economic indicators of three-phase standard industrial induction motors (IM). We suggest that such engines should be used in the propulsion complexes of modern autonomous floating vehicles (AFV). Such a task is to be solved because of the need to provide the propulsion complex of AFV with energy-efficient and inexpensive electric motors. It is proposed to apply four-pole electric motors, instead of bipolar electric motors, at an elevated rated power frequency (100, 150, 200 Hz). Employing the method of analogies of geometrically similar electric machines, it is substantiated to apply the shortened three-phase four-pole IM instead of bipolar IM. We have conducted a detailed analysis of the basic structural and energy characteristics of the modernized general-purpose IM. It was established that in the modernized four-pole IM of the AFV propulsion complex the weight and size parameters are significantly reduced (by approximately 15 %). This is enabled by a simple structural modernization. Given such a modernization, it is not necessary to manufacture new bearing assemblies, lids; in this case, mass of the utilized active materials decreases (by 10...17 %). The research results make it possible to meet the needs of modern AFV production in energy-efficient (power factor of modernized engines is approximately 0.56) and inexpensive electric motors for a propulsion complex.</p>
Authors and Affiliations
Yana Volyanskaya, Sergey Volyanskiy, Oleg Onishchenko, Stanislav Nykul
Keywords
Related Articles
- EP ID EP527904
- DOI 10.15587/1729-4061.2018.126144
- Views 69
- Downloads 0
Designing a system of liquid cooling for industrial microwave installations
The paper considers the issue on ensuring a thermal regime of the magnetron's anode unit by replacing an air-cooling system with the system of liquid cooling. It has been argued that a liquid cooling system is most suita...
Effect of evaporator-condenser diameter ratio (d/D) on thermal performance of the tapering heat pipe with various heat sources
<p class="MDPI17abstract">In the present study, a new tapering heat pipe design had been developed to enhance the thermal performances. Boiling visualization in the tapering heat pipe is investigated to provide the detai...
Development of measures to improve milk quality and safety during production
<p>The number of somatic cells in cow milk affects its quality indicators, grade and safety. The level of somatic cells in milk depends on the state of the udder in animals. That is why it is important to diagnose sub-cl...
Improvement of reliability of fire engineering equipment based on a jet-niche technology
<p>The obtained results address the solution to problems on enhancing the reliability and operation efficiency of fuel consuming equipment at industrial and power engineering facilities in the course of low-cost moderniz...
Improving the energy efficiency of solar systems for obtaining water from atmospheric air
<p>We considered problems of water scarcity elimination in arid regions of the planet and analyzed modern water producing systems. We showed the prospects of obtaining of water from atmospheric air directly while cooling...