Analysis of risk of nonconformities and applied quality inspection methods in the process of aluminium profiles coating based on FMEA results
Journal Title: Production Engineering Archives - Year 2017, Vol 0, Issue
Abstract
In the aerospace industry, passenger safety depends on proper quality control at each production stage. The main responsibility for the correct operation of the aircraft lies within a gas turbine. A proper and rigorous selection of the gas turbine construction material is required, and in a further step, the method of joining the construction parts. Nickel superalloys due to the high heat resistance, strength and creep resistance at high temperatures, toughness and corrosion resistance, are very often used for the construction of a gas turbine engine. In the next step, the selection of joining method is necessary. This method must be able to achieve high-quality connections, resistant to work at high temperatures and corrosive environments. The most effective bonding method that meets the above conditions is brazing. In this study non-destructive (visual) test and destructive (metallographic) test of brazed joint of Inconel 718 and Inconel 625 were conducted.
Authors and Affiliations
K. Knop
Keywords
Related Articles
- EP ID EP261098
- DOI -
- Views 49
- Downloads 0
Influence of load and reinforcement content on selected tribological properties of Al/SiC/Gr hybrid composites
Hybrid materials with the metal matrix are important engineering materials due to their outstanding mechanical and tribological properties. Here are presented selected tribological properties of the hybrid composites wit...
INFLUENCE OF MODIFCATION ON THE REFINEMENT OF PRIMARY SILICON CRYSTALS IN HYPEREUTECTIC SILUMIN AlSi21CuNi
On the paper the influence of modifying micro additives on the refinement of primary silicon crystals in the hypereutectic AlSi21CuNi piston silumin have been examined. As the modifiers there were used micro additives of...
Selected aspects of hydraulic issues in heating systems
Rational and efficient use of thermal energy in recent years has resulted in significant changes in the heating system as well as technological progress. In order to design a heating system properly and exploit it correc...
Use of statistical acceptance of products in the automotive industry
The article presents the results of studies on the implementation of statistical acceptance of products with the example of a styrene-rubber plastic connector, while considering particular stages of production. The chara...
Overview of the main methods of service quality analysis
Everyone, every day or almost every day, uses various type of services, without being even aware of it. They could have been both intangible and material services. Customers want to receive services of the highest qualit...