Analysis of the impact of changes in the stator magnetic circuit on static properties of the electromagnetic linear motor model
Journal Title: Bulletin of the Military University of Technology - Year 2018, Vol 67, Issue 3
Abstract
In this paper, the static characteristics as a function of changes in geometric dimensions of the stator magnetic circuit of the linear stepper actuator with permanent magnets is presented. The stator is built from a series of cylindrical coils encapsulated with ferromagnetic case. The runner is made of permanent magnet rings connected with ferromagnetic spacers. The electromagnetic interac-tion between the stator and the runner for the sequential supply of coils was analyzed. The electro-magnetic force as a function of the geometry of the coils and the ferromagnetic housing for the con-stant graduation of the runner was determined. The maximum, minimum, and average values of the electromagnetic force as a function of the geometric independent variable were determined. The ratio of the mean force to the maximum, and mechanical work calculated as the integral of the force on the path of the runner was adopted as the evaluation criteria. A comparison between the maximum, average and relative values of forces as a function of the geometric dimensions of the stator was made. Keywords: modelling and simulation, linear actuator, finite element method, field calculations, cogging force, magnetic force.<br/><br/>
Authors and Affiliations
Krzysztof Just, Paweł Piskur
Keywords
Related Articles
- EP ID EP398985
- DOI 10.5604/01.3001.0012.6593
- Views 45
- Downloads 0
Microclimate and health properties of autoclaved building materials in the context of their modification
The construction industry in a special way affects the condition of the state of the environment and human. It is necessary to search for materials with the lowest degree of risk to humans. The aim of the article is to f...
Kalibracja wzorców transferowych AC/DC w Centralnym Wojskowym Ośrodku Metrologii
W artykule omówiono metodę kalibracji wzorca transferowego Fluke 5790A z użyciem transferowego wzorca odniesienia Fluke 792A, stosowaną w Centralnym Wojskowym Ośrodku Metrologii. Przedstawiono równanie pomiaru, budżet ni...
Dynamic displacement analysis of reinforced concrete deep beams made of high strength concrete. Part III: Analysis of dynamic displacement of a reinforced concrete deep beam made of high strength C300 grade concrete
This work demonstrates an analysis of the displacement state of rectangular concrete deep beams made of very high strength concrete grade C300 under a dynamic load, including the physical nonlinearity of construction mat...
Construction of a local location program on the basis of “decision tree”
The article presents the problems of building a damage location program in a technical facility based on the theory of the “decision tree”. The basis in such a decision-making process is the functional and diagnostic ana...
Measurement accuracy analysis for microgeometry nanostandards with microinterferometer and stylus profilometer
The goal of the work, described in this paper, was to examine and analyse measurement capabilities of GUM Length and Angle Department in measurements of step height/depth standards with the values below 1 μm (nanostandar...