Analysis of the quality problems during production process of the stud frame of the stretching station
Journal Title: Production Engineering Archives - Year 2014, Vol 0, Issue 1
Abstract
The stud frame of stretching station WSH 400/15 was the main subject of the researches presented in this paper. The aim of the article was the quality analysis of the stud frame during its production process. Construction and scheme of production process of stud frame was presented. Analysis of main areas which generate incompatibilities of researched element was made. Proposals of process improvement with the help of relation diagram and affinity diagram were presented.
Authors and Affiliations
Manuela Ingaldi
Keywords
Related Articles
- EP ID EP165800
- DOI -
- Views 73
- Downloads 0
Usage of 3D printing in photostress investigation
In this paper a theoretical analysis of load cases will be constructed, which are the most difficult to be determined during numerical simulations. The development of the design principles and methods are significantly i...
Analysis of causes and effects errors in calculation of rolling slewing bearings capacity
In the paper the basic design features and essential assumption of calculation models as well as the factors influencing quality improvement and improvement of calculation process of bearing capacity of rolling slewing b...
Evaluation of service conditions of the machines within the furniture joinery
The aim of this thesis is to present the operation of machines within the furniture joinery, presentation of the risks for this branch, discussion of quality and technical documentation within the analysed enterprise, ch...
ROUGHNESS OF 1.0721 STEEL AFTER CORROSION TESTS IN 20% NaCl
Non-alloy quality case-hardening steels are used for low-load components made on automatic machining centers (automatic lines). Because of the widespread use of these steel in open constructions, they are exposed to atmo...
Evaluation of paving stone production quality
The results of tests carried out for the company involved in the production of paving stones. The study used the Pareto-Lorenz diagram. After analyzing the production process 10 discrepancies were identified. The Pareto-...