ANALYSIS OF THERMAL PROPERTIES OF FLOORS IN HEATED BUILDINGS
Journal Title: Вісник Національного університету "Львівська політехніка". Серія "Теорія та практика будівництва" - Year 2018, Vol 0, Issue 904
Abstract
The article discusses some thermal properties of floors and floorings, such as heat transfer and heat absorption. It was pointed out that there are no specific requirements in the field of heat absorption by floor construction in the Polish building regulations. The property of heat accumulation through the floor not only affects the thermal sensations of the room users, but also affects the heat loss of such a construction. The main objective of the study was to assess the heat absorption capacity of floors and flooring made of various types of wood and compare them with floors finished with natural stone or ceramic tiles. Comparison of the thermal activity of the floor from different types of wood shows some differences that allow to identify types of wood that may be more or less active in these thermal processes. Characteristically, it has also been found to determine a wood floor thickness that is similar for different types of wood, where the properties related to heat accumulation stabilize. In the case of a floor finished with natural stone or with ceramic floor tiles, in contrast to wood, as the thickness of the finishing layer increases, an increase in the activity associated with the accumulation of heat is observed.
Authors and Affiliations
Adam Ujma, M. Kur
Keywords
Related Articles
- EP ID EP494762
- DOI -
- Views 79
- Downloads 0
AUTONOMOUS SOLAR ELECTRICAL PLANT FOR ACAB BUILDING
Solar energy refers to renewable energy sources and has significant potential for use. Solar energy is used to generate heat or electric energy. Electricity generation by solar power plants is practiced around the world....
ANALYSIS OF THERMAL PROPERTIES OF FLOORS IN HEATED BUILDINGS
The article discusses some thermal properties of floors and floorings, such as heat transfer and heat absorption. It was pointed out that there are no specific requirements in the field of heat absorption by floor constr...
МІЦНІСТЬ ЗАЛІЗОБЕТОННИХ БАЛОК, ПІДСИЛЕНИХ ПОПЕРЕДНЬО НАПРУЖЕНОЮ АРМАТУРОЮ
This article describes strengthening normal cross-section of reinforced concrete beams with prestressed reinforcement under load. The samples of RC beam with 2100 mm. length, 100 mm width, and 200 mm height was tested. A...
Двокамерні повітророзподільники
The current state and trends of air displacement ventilation systems for public and industrial buildings are analyzed. It identified the significant advantages of displacement ventilation.. Disadvantages of the existing...
INFLUENCE OF ELEVATED TEMPERATURES ON THE PERFORMANCE OF NANOMODIFIED FIBER-REINFORCED CONCRETES
Exposure to elevated temperatures has detrimental effects on the properties of concretes based on the Portland cement, leading to irreversible changes, up to total failure. One of solutions to improve resistance of struc...