Analysis of tribological efficiency of movable junctions "polymericcomposite materials ‒ steel"
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 4, Issue 12
Abstract
<p>The paper reports an analysis into tribological efficiency of mating parts "polymeric-composite materials ‒ steel" is carried out. Improperly selected materials produce significant operating costs in terms of tribology. Therefore, selecting the type of polymeric-composite materials to be used in the structures of nodes and machine parts is a task related to substantial improvement of their technical level.</p><p>The testing of samples made from polymeric-composite materials for relative abrasive resistance when mated with samples made from steel 45 has made it possible to establish that the lowest value for weight wear was demonstrated by material Nylon 66. Among the examined materials, the closest to Nylon 66 in terms of the values for relative abrasive resistance is the material PA-6-210KS that demonstrated the values that are 1.65 times less. During operation of machines, in the presence of abrasive wear, it is advisable to mate the materials "Nylon 66 – steel 45" and "PA-6-210KS – steel 45". The results from a tribotechnical study without lubrication at the friction machine SMC-2 for the mating parts "polymeric-composite material – steel 45" make it possible to establish that the least wear was demonstrated by sample made from the material UPA-6-30, that is 0.00083 g. In terms of wear resistance, the closest to it is a sample from the material PAG/6.6 R196-GF30, which is 6.1 times greater for weight wear. The sample made from steel 45 mated with a sample from the material UPA-6-30 has the lowest value of weight wear, 0.00005 g. At the same time, the lowest value for the friction coefficient is demonstrated by the mated materials "steel 45 – UPA-6-30", 0.163. The progress of the mating process is achieved fastest, after 20 minutes, when using the material UPA-6-30 at a temperature in the friction zone of 348±2 K.</p>Our research is necessary to substantiate further utilization and selection of polymeric-composite materials for mating parts working under difficult conditions. The current study is of interest to manufacturers of agricultural and quarry machinery and various transport machines.
Authors and Affiliations
Viktor Aulin, Oleksii Derkach, Dmytro Makarenko, Andrii Hrynkiv
Keywords
Related Articles
- EP ID EP667090
- DOI 10.15587/1729-4061.2019.176845
- Views 76
- Downloads 0
Design of parallel link mobile robot manipulator mechanisms based on function-oriented element base
<p>To create effective mobile robot manipulators, a function-oriented element base is proposed. Element base selection is based on the analysis of schematics of mobile robot manipulators. It is substantiated that the eff...
Development of lean titaniumalloyed aluminium alloy for electrotechnical purposes
<p>The influence of titanium amount and pouring temperature on the structure and properties of lean-alloyed alloy was explored. It was determined that lean titanium-alloyed aluminum alloys have better mechanical and elec...
Development of the methodological approach to the selection of technologies for environmentallysafe water drainage in populated areas
<p class="a">The methodological approach to the selection of a technological measure of environmentally safe water drainage in populated area located on the eutrophied water sites was developed. The use of this approach...
Exploiting the knowledge engineering paradigms for designing smart learning systems
<p class="a">Knowledge engineering (KE) is a subarea of artificial intelligence (AI). Recently, KE paradigms have become more widespread within the fields of smart education and learning. Developing of Smart learning Sys...
Development of structural-parametric optimization method in systems with continuous feeding of technological products
<p>Increasing the efficiency of continuous technological processes, in practice, involves certain difficulties. The presence of these difficulties is due to the fact that the technological product quality is functionally...