Analysis of Vibration And Surface Finish in Turning of En8
Journal Title: International Journal of engineering Research and Applications - Year 2018, Vol 8, Issue 1
Abstract
In this paper, an attempt has been made to use vibration signals for inprocess prediction of surface roughness during turning of EN8 alloy. The investigation was carried out to determine the relationship between cutting speed , feed rate ,depth of cut and the amplitude of vibrations with the surface roughness .In this analysis cutting speed ,feed rate ,depth of cut were included as input parameters asides to get the amplitude of vibration in surface roughness prediction . Experimental and theoretical analyses were done and a variation of 8 % is determined.
Authors and Affiliations
Hemanandan Pugalenthi, N. Kannan, S. Bhagavathi Shankar
Keywords
Related Articles
- EP ID EP393433
- DOI 10.9790/9622-0801039497.
- Views 115
- Downloads 0
Steganography Scheme Based on LSB Embedding Technique with Different Image Format
To increase the security of messages sent over internet steganography is used. Various steganography techniques have been proposed so far. Least Significant Bit steganography is one such technique in which least signific...
An Improving Method of Grid Graphical Password Authentication System
Security in the computer is largely supported by passwords for authentication process. Alphanumeric passwords still remain as the most common Authentication method. This conventional authentication method has been shown...
Produced Water Treatment Utilizing Process Heat from High Temperature Gas Cooled Reactor (HTGR) in Permian Basin
When settlers first occupied west Texas in the 1800‟s they believed that the underlying “Ogallala Aquifer” had the capacity to provide a more than an adequate supply of the residents‟ fresh water needs. The Ogallala is b...
Measuring the Thermal Conductivities of Low Heat Conducting Disk Samples by Monitoring the Heat Flow
This article aims to establish an experimental procedure to measure heat transmission coefficients in low heat conductive materials. The newly developed model takes as starting point the application of Fourier’s law to a...
Wireless Sensors Network Applications In The Behavior Of Environmental Parameters
The Wireless Sensor Network (WSN) has allowed monitoring parameters to improve the production of Precision Agriculture (AP), thus making decision making immediately and improving agricultural production, so this research...