Analytical Assessment on The Removal of Phenol From Aqueous Solution Using orange Peel Based Activated – Carbon
Journal Title: American journal of Engineering Research - Year 2017, Vol 6, Issue 12
Abstract
This study examines the effectiveness of activated carbon from orange peel in the removal of phenol from aqueous solutions. The effect of many parameters such as concentration, time, adsorbent dose and pH in the adsorption were studied. The values obtained showed that as the concentration of phenol increased in the solution from 10 to 50mg/l the concentration of phenol adsorbed by a constant mass of the adsorbent decreased. Increased in contact time from 25 to 145 minutes, increased the concentration of phenol adsorbed from 1.120.004 to 2.52 0.026mg/l. Varying the adsorbent dosage from 0.5 to 2.5g, the quantity of phenol increased from 1.510.034 to 2.110.004mg/l and decreased to 1.810.003mg/l at an adsorbent dose of 2.5g. Increase in the pH range from 1.26 to 8.79 increased the concentration of phenol adsorbed from 1.380.05 to 2.41 0.004mg/l in pH 1.26 to 3.22. However, this study proves that orange peel activated carbon is a good material for purification of our drinking water from phenol.
Authors and Affiliations
1 Edidiong Ikpe,, 2 Esua Edidiong,, 3 Ifiok Ekwere, 4 Itoro Willie ,, 5Adeniyi Olumide
Investigating the Influence of Casting Parameters on the Mechanical and Microstructural Characteristics of Grade Al6063 Alloy
Influence of casting parameters on the mechanical properties and microstructure of alloys is gaining more prominent research concerns. The main aim of this work is to investigate the effect of three main casting paramete...
Source and Distribution of The Heavy Metals: Pb, Cd, Cu, Zn, Fe, Cr, and Mn in Soils of Bauchi Metropolis, Nigeria
In this research work the level and distribution pattern of the metals: Pb, Cu, Cd, Cr, Zn, Mn, and Fe were determined in soil of Bauchi Metropolis. Samples were collected from places of high anthropogenic activity such...
Methods for Determining Oxygen Overvoltage and Anode Poisoning Over Time at Iron-Group Metals under High Current Densities in Alkaline Water Electrolysis
Determination of oxygen overvoltage (s) is complicated by high current densities under alkaline water electrolysis. Therefore, it is desirable to develop method for advanced control of oxygen overvoltage. Here, we show...
An Implementation Of A Gsm Controlled Security Robotic Vehicle
Over the years, robotic vehicles used in unmanned rescue missions, security in jewelry stores, military combat, security in bank vaults and many others, make use of wireless technology in controlling the vehicles. The ma...
Design Of A Neural Network Controller To Enhance The Control Of Flights In Bad Weather Conditions
Adaptive control is a control method used by a controller which must be adaptable to the controlled system in relation to the parameters which may vary, or are initially uncertain. This is concerned with the control laws...