Anisotropic Rock Physics Model Based Statistical Inversion
Journal Title: Petroleum & Petrochemical Engineering Journal - Year 2017, Vol 1, Issue 3
Abstract
Fracture detection using seismic response is typically carried out using methods which do not depend on details of the underlying anisotropic rock physics. Such methods may include ellipse fitting of a suitable seismic attribute followed by the assumption that the ratio of major to minor axes is proportional to fracture density.
Authors and Affiliations
Xiaoyang Wu
Keywords
Related Articles
- EP ID EP407335
- DOI -
- Views 98
- Downloads 0
Use of Used Cooking Oil as CI Engine Fuel - A Review Paper
Since past two decades scientist are involved in research activities to find alternate fuel for CI engine and still it is continuously going on. On account of rapid industrial growth and large commencement of vehicle air...
Prediction of the Behavior for Polymer Blends Using Thermodynamic Model
Two polymer blends were prepared. The first one was Poly methyl methacrylate (PMMA) and Poly vinyl acetate (PVAc), and the second was Poly vinyl chloride (PVC) and Polystyrene (PS). The first blend prepared by mixing two...
Modelling and Simulation of Riser Reactor of a Commercial Fluid Catalytic Cracking Unit Using 6-Lump Kinetics of Vacuum Gas Oil
Both primary and conventional secondary recovery methods can approximately produce 35% of the original oil in place (OOIP). Application of nanotechnology in the petroleum industry as part of nanotechnology has already dr...
Investigating the Effect of Different Nanoparticles on the Interfacial Tension Reduction
Nanoparticles gained respectful attention in the oil industry due to their ability to enhance physical properties for the injected fluid, and reservoir fluid. Many kinds of literaturehave demonstrated nanoparticles abili...
Sizing Surface Production Flow line Insulation Thickness for a Desired Output Temperature
Oil and gas is transported from the wellheads to the gathering stations through pipelines called surface production flow-lines. Flow-lines are located at the oil and gas well site and tied to specific wells. Flow-line ma...