ANN & ANFIS Models for Prediction of Abrasive Wear of 3105 Aluminium Alloy with Polyurethane Coating
Journal Title: Tribology in Industry - Year 2016, Vol 38, Issue 2
Abstract
The quest for safety and reliability has increased significantly after Industrial revolution, so is the case for coating industries. In this paper 3105 Aluminium alloy sheet is coated with organic polyurethane coating. After the implementation of coating, various processes are undergone to check its reliability under elevated conditions. ANN & ANFIS model were developed and trained with an objective to find abrasive wear during the process. ANN & ANFIS model were compared with the experimental results. It is observed that the abrasive wear of a coated specimen can be predicted accurately and precisely using ANN and ANFIS models.
Authors and Affiliations
H. Alimam , M. Hinnawi , P. Pradhan , Y. Alkassar
Keywords
Related Articles
- EP ID EP154278
- DOI -
- Views 56
- Downloads 0
Influence of the Lubricant Type on the Surface Quality of Steel Parts Obtained by Ironing
If it is needed to achieve a higher strain rate during the ironing process, which is possible without inter-stage annealing, the ironing is performed in succession through multiple dies. During that process, changes of f...
Eco-friendly Multifunction Petroleum Additives: Preparation, Characterization and Evaluation
ZDDP (zinc dialkyldithiophosphate) is one of the most commonly used petroleum additives as anti-wear, anti-rust and anti-oxidant but it has some environmental problems, so there is a must to find alternative eco-friendly...
Wear Characteristics of Hybrid Composites Based on Za27 Alloy Reinforced With Silicon Carbide and Graphite Particles
The paper presents the wear characteristics of a hybrid composite based on zinc-aluminium ZA27 alloy, reinforced with silicon-carbide and graphite particles. The tested sample contains 5 vol.% of SiC and 3 vol.% Gr parti...
Studies on Plasma Sprayed Thermal Barrier Coating with Increase in Coating Thickness
In this study, the nature of performance test like a bond test, wear test and hot corrosion test and its effects on plasma sprayed Yttria-stabilized zirconia and Al2O3 composite (50:50 compositions) coating on Aluminium...
Influence of Combined Hard and Fine Machining on the Surface Properties of Cemented Carbides
As a result of recent developments in cold forging cemented carbides are increasingly used as tool materials. Due to their high hardness only electrical discharge machining (EDM) and grinding are suitable for tool machi...