Application of “PolySwitch” fuses for the limitation of current overloads in photovoltaic systems of solar arrays

Journal Title: Journal of Physics and Electronics - Year 2018, Vol 26, Issue 1

Abstract

The results of experimental study of the transformation of the light current-voltage and volt-watt characteristics for the parallel connections of photovoltaic modules when using “PolySwitch” polymer resettable fuses are given. The conditions for selecting such fuses which allow their correctly triggering and minimize the current overload are formulated and experimentally verified. It is established that if resettable fuses are connected in series to the circuits of all photovoltaic modules, which are connected in parallel thus forming a unit, this prevents such a situation as the complete loss of electrical energy generated by this unit due to the short circuit of one of its modules. At the fuse triggering the total power loss of the unit of parallelly connected photovoltaic modules is mainly determined by the decrease of its current by the amount that is equal to the current of the disconnected photovoltaic module.

Authors and Affiliations

A. V. Ivanchenko, A. S. Tonkoshkur, S. V. Mazurik

Keywords

Related Articles

UV irradiation effect on the electrical properties of Pb2MoO5 single crystal

Electrical properties of Pb2MoO5 single crystal were studied in AC field (f=1 kHz) after irradiation with UV light (290 K). It was found that UV irradiation caused appearance of maximums on permittivity ε and conductivit...

Lattice vibrations and disorder in crystalline benzoxazoles undergoing excited state intramolecular proton transfer: DFTB modeling

Structure and crystal lattice vibrations are calculated for 2-(2'-hydroxyphenyl)bezoxazole and bis-(2,5-benzoxazolyl)hydroquinone by density functional based tight-binding methods. Despite lowering of the molecular symme...

Application of “PolySwitch” fuses for the limitation of current overloads in photovoltaic systems of solar arrays

The results of experimental study of the transformation of the light current-voltage and volt-watt characteristics for the parallel connections of photovoltaic modules when using “PolySwitch” polymer resettable fuses are...

Electrophysical characteristics of the near-surface layer of semiconductor ceramics for ZnO varistors

Electrophysical properties of near-surface layer of ZnO varistor ceramics forming during high-temperature annealing in oxidizing gaseous atmosphere are studied. Microstructure of near-surface layer and its electrical pro...

The peculiarities of formation and thermodynamic functions of τ-phase

It is shown that for alloys with boron content of 0.1–6.5% (wt.) and carbon content of 0.3–4.0% (wt.) without pretreatment no formation of cubic boron carbide takes place under crystallization. The cubic boron carbide ca...

Download PDF file
  • EP ID EP540752
  • DOI 10.15421/331813
  • Views 206
  • Downloads 0

How To Cite

A. V. Ivanchenko, A. S. Tonkoshkur, S. V. Mazurik (2018). Application of “PolySwitch” fuses for the limitation of current overloads in photovoltaic systems of solar arrays. Journal of Physics and Electronics, 26(1), 77-82. https://europub.co.uk/articles/-A-540752