Application of Spontaneous Oxidation Processes of Zero-valent Iron and Electrocoagulation for Reactive Black 5 Removal
Journal Title: Fibres and Textiles in Eastern Europe - Year 2017, Vol 25, Issue 4
Abstract
Two methods of Reactive Black 5 dye removal were compared in this work, namely electrocoagulation (EC) and one based on spontaneous electrochemical oxidation of zero-valent iron (ZVI). Both methods are based on electrode processes and the sorption process and allow to achieve a similar effectiveness of dye removal. In the case of ZVI, however, a longer contact time or a greater surface area of the electrodes applied is necessary. In turn, the ZVI enables to conduct the processes of dye removal with no requirement for an external source of electric current (lower exploitation inputs). The study demonstrated that the application of both the ZVI method and EC is especially advisable in the case of lower initial concentrations of dye in the solution, i.e. the higher the concentration, the lower the contribution of electrode processes in dye removal from the solution and the greater the contribution of sorption processes.
Authors and Affiliations
Izabela Wysocka, Urszula Filipkowska, Tomasz Jóźwiak
Keywords
Related Articles
- EP ID EP209054
- DOI 10.5604/01.3001.0010.2857
- Views 71
- Downloads 0
Wielokanałowy optyczny system do kontroli jakości druku cyfrowego
Czynniki ekonomiczne oraz ochrona środowiska odgrywają kluczową rolę w nowoczesnej technice barwienia materiałów tekstylnych, w której barwniki są nakładane w procesie przypominającym drukowanie. Poza dowolnie zaprojekto...
Measurement Methods of Dynamic Yarn Tension in a Ring Spinning Process
The most common measuring method to characterise the dynamic yarn path in the ring spinning process is to measure the yarn tension, where the yarn path is almost straight. However, it is much more complex to measure the...
Influence of Teeth Manufacturing Tolerances of Cylindrical Geared Wheels on GearOperating Characteristics Based on Spinner Stretching Apparatus
In the paper, issues related to the errors and inaccuracies resulting from improper operation of the drive system of the stretching apparatus of a ring spinner are discussed. The aim of the paper was an analysis of a des...
Identyfikacja sylwetki ubranego modelu
Przedstawiono próbę identyfikacji sylwetki ubranego modelu. Opracowano system właściwości charakteryzujących twarz człowieka dla możliwości dalszego wyodrębnienia twarzy ze zdjęć modeli. Zastosowano metodę AdaBoost. Umoż...
Performance Analysis of the Mechanical Behaviour of Seams With Various Sewing Parameters for Cotton Canopy Fabrics
This study aims to develop a tool to predict the behaviour under a load of textile seams, to enable the selection of materials for specified end uses in the parachute industry. The strength of an assembly is directly dep...