Abstract

Taguchi Method is a statistical approach to optimize the process parameters and improve the quality of components that are manufactured. The objective of this work is to illustrate the procedure adopted in using Taguchi Method to a drilling operation. The OA , S N ratio, and the ANOVA are employed to study the performance of drilling operation. In this analysis, three factors namely speed feed and depth of cut were considered. Accordingly, a suitable orthogonal array was selected and experiments were conducted. After conducting the experiments the MRR and Surface roughness was measured and Signal to Noise ratio was calculated. With the help of graphs, optimum values were obtained and confirmation experiments were carried out. These results were compared with the results of previous work . It reports that research relating to improving performance measures, optimizing the process parameters. The published paper also discusses the future trend of research work in the same area. R. Manohara | Mr. A. Harinath "Application of Taguchi Method for Optimization of Process Parameters in Drilling Operation" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd24003.pdf Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/24003/application-of-taguchi-method-for-optimization-of-process-parameters-in-drilling-operation/r-manohara

Authors and Affiliations