Applications of Open Source 3-D Printing on Small Farms
Journal Title: UNKNOWN - Year 2015, Vol 1, Issue 1
Abstract
There is growing evidence that low-cost open-source 3-D printers can reduce costs by enabling distributed manufacturing of substitutes for both specialty equipment and conventional mass-manufactured products. The rate of 3-D printable designs under open licenses is growing exponentially and there arealready hundreds of designs applicable to small-scale organic farming. It has also been hypothesized that this technology could assist sustainable development in rural communities that rely on small-scale organic agriculture. To gauge the present utility of open-source 3-D printers in this organic farm context both in the developed and developing world, this paper reviews the current open-source designs available and evaluates the ability of low-cost 3-D printers to be effective at reducing the economic costs of farming.This study limits the evaluation of open-source 3-D printers to only the most-developed fused filament fabrication of the bioplastic polylactic acid (PLA). PLA is a strong biodegradable and recyclable thermoplastic appropriate for a range of representative products, which are grouped into five categories of prints: handtools, food processing, animal management, water management and hydroponics. The advantages and shortcomings of applying 3-D printing to each technology are evaluated. The results show a general izabletechnical viability and economic benefit to adopting open-source 3-D printing for any of the technologies, although the individual economic impact is highly dependent on needs and frequency of use on a specific farm. Capital costs of a 3-D printer may be saved from on-farm printing of a single advanced analytical instrument in a day or replacing hundreds of inexpensive products over a year. In order for the full potential of open-source 3-D printing to be realized to assist organic farm economic resiliency and self-sufficiency, future work is outlined in five core areas: designs of 3-D printable objects, 3-D printing materials, 3-Dprinters, software and 3-D printable repositories.
Authors and Affiliations
Joshua Pearce
Keywords
Related Articles
- EP ID EP196504
- DOI 10.12924/of2015.01010019
- Views 127
- Downloads 0
Changes in Knowledge Management Strategies Can Support Emerging Innovative Actors in Organic Agriculture: The Case of Participatory Plant Breeding in Europe
The “transfer of technology”, typical of a top-down linear process of innovation cannot be used in the new contexts of sustainability, characterised by uncertainty and complexity. There is a need to redefine categories a...
A Fresh Start for Organic Farming Research
Over the past few decades the area of farmland underorganic management has significantly and continuously increased [1]. This trend, observed across all continents, has been accompanied by a strong expansion of the mark...
Evolutionary Effects on Morphology and Agronomic Performance of Three Winter Wheat Composite Cross Populations Maintained for Six Years under Organic and Conventional Conditions
Three winter wheat (<em>Triticum aestivum</em> L.) composite cross populations (CCPs) that had been maintained in repeated parallel populations under organic and conventional conditions from the F5 to the F10 were compar...
A Review of 'Organic Struggle: The Movement for Sustainable Agriculture in the United States'
Organic Struggle chronicles the challenges encountered by innovators in a growing segment of the U.S. food pro- duction and marketing system. Practiced for millenia by farmers before the introduction of chemical fertiliz...
Comparative Harvest Efficiency of Soybeans between Cropping Systems Affected by First Pod Height and Plant Length
Today, the demand for soybean for feed industry and food production in Germany is met by imports from South and North America. Soybean cultivation in Germany, although challenging, will be of interest in the future due t...