Arduino-UNO Operated Hall-effect Sensor Based Magnetic Field Strength Measurement System
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2017, Vol 5, Issue 4
Abstract
Magnetic field strength is one of two ways that the intensity of a magnetic field can be expressed. Technically, a distinction is made between magnetic field strength H, measured in amperes per meter (A/m), and magnetic flux density B, measured in Newton-meters per ampere (Nm/A), also called teslas(T). In our proposed work we are using the concept of ADC (Analog to Digital Conversion) in ARDUINO UNO. By using a Hall Effect sensor and Arduino UNO we are going to measure the field strength of a magnet by using UGN3503U sensor. This is a hall sensor which senses the magnetic field strength and provides a varying voltage at output proportional to the field strength. This sensor picks up field strength in the units of ‘GAUSS’. So with this sensor we will have field strength as varying voltage. By using ADC feature we will convert this voltage to a number. This number represents the field strength and is shown on LCD.
Authors and Affiliations
Bidyutmala Saha, Sourish Mitra, Srabani Kundu, Nirupam Saha, Sayani Chandra
Keywords
Related Articles
- EP ID EP23952
- DOI http://doi.org/10.22214/ijraset.2017.4246
- Views 466
- Downloads 12
Study of Interference in WiFi-WiMAX Network
Wireless mesh networks are evolving at a rapid rate. They overcome most geographical, temporal and organizational barriers to the transfer of data. Interference in wireless systems is one of the most significant factors...
Effect of Common Salt (Nacl) On Index Properties of Black Cotton Soil (BCS)
In this research paper is to investigate the effect of Common salt (NaCl) on the index properties of Black cotton soil. This black cotton soil were mixed with various amount of Common Salt (0, 2, 4, 6, and 8) % to study...
Implementation of Embedded System Based Face Recognition System
Face Recognition is the ability to detect and recognize a person by their facial characteristics. Face is a multidimensional and hence requires a lot of mathematical computations. Face recognition system is very essenti...
Evaluation of System Parameters on Electrical Machine Bearings through Reduced order models
This paper examines ac motor shaft voltages and resulting bearing currents when operated under Pulse Width Modulation (PWM) voltage source inverters. A brief view of a system model for electrical analysis of bearing cur...
Designing of PPG based Heart-beat Monitor
The objective of this paper to presents an overview of the design process undertaken to implementation of a low cost wearable PPG system. using basic available component in the lab. The detailed explanation of the vario...