ARSENIC, NICKEL AND LEADREMOVAL FROM UNDERGROUND WELLS BY ADSORPTION ON LATERITE SOIL
Journal Title: INTERNATIONAL JOURNAL OF ENGINEERING TECHNOLOGIES AND MANAGEMENT RESEARCH - Year 2018, Vol 5, Issue 2
Abstract
The pollution by heavy metal in the environment, particularly groundwater, constitutes an environmental problem and health in Côte d’Ivoire. Among methods used for removal heavy metals, adsorption by natural absorbent such as a laterite is effective and cheap when compared to other methods. So, this study evaluates the laterite reactor performance for effective removal of heavy metals viz., arsenic (As), nickel (Ni) and lead (Pb) from real-life groundwater. And adsorption of heavy metals was performed with laterite of different particle sizes, viz. coarse grain size of laterite (LRCOG) and laterite granules (LRG). The results obtained showed that the percentages of removal of heavy metal are higher than the size of the laterite. As, Ni and Pb removal are 98.3 ± 0.4%, 99.2 ± 0.2% and 96.1 ± 1.1% respectively in LRCOG effluents. With the laterite in form of granules, percentage removal were of 98.6 ± 0.3% for As that of the Ni is of 99.7 ± 0.2% and 97.9 ± 0.5 % for Pb. The adsorption of heavy metal on the two types of laterite particle size is in the same order of effectiveness: Ni˃As˃Pb.
THE PROPERTIES OF LATERITE SOILS AS THEY AFFECTS THE STABILITY OF BITUMEN STABILISED BRICKS
The purpose of this study is to determine the properties of laterite soil and how they affect the stability of bitumen stabilized bricks. The samples for the study were disturbed samples sourced in seven locations in Ada...
THE EFFECT OF TRADE BRANDS ON PURCHASE DECISIONS ON HONDA MOTORS IN PT ABADI MOTOR INDONESIA
Trademarks will be a source of competitiveness that can last a long time and can be a producer of cash flow for the company in the long run. Products that have strong brands will be difficult to imitate because consumers...
ANALYSIS OF UWB BASED ANTENNA FOR WIRELESS COMMUNICATION
Ultra-wideband wireless communications techniques have many merits, including an extremely simple radio that inherently leads to low-cost design, large processing gain for robust operations in the presence of narrowband...
A REVIEW OF NOVEL APPROACH FOR REDUCTION IN SUB CARRIER PEAK TO AVERAGE POWER RATIO IN ORTHOGONAL FREQUENCY DIVISION MULTIPLEXING
In last few decades the demand for multimedia data services has grown up fastly. One of the most promising multicarrier system, Orthogonal Frequency Division Multiplexing (OFDM) allow large number of capacity the number...
EXPERIMENTAL STUDY AND ANALYSIS OF WEAR IN SHEET METAL DURING VARIOUS FORCES
Sheet metals are metal formed by an industrial process into thin, flat pieces. It is one of the fundamental forms used in metal working and it can be cut and bent into a variety of shapes. Countless everyday objects are...