Assessment of metal concentrations in tap-water – from source to the tap: a case study from Szczecin, Poland
Journal Title: Geologos - Year 2014, Vol 20, Issue 1
Abstract
The concentrations of Al, As, Cd, Cu, Pb, Zn, Ni, Fe and Mn were determined in June 2010 for 100 tap-water samples, collected directly at consumers in the older part of the city of Szczecin (Poland). Increased concentrations of metals were thus detected. This concerns mainly Fe (19% of samples showed concentrations above drinking-water quality standards) and Pb (5%). In some samples, the maximum admissible concentration levels for Mn, Cu and Ni were also exceeded. This was not the case for Al, despite the use of aluminium compounds during water treatment; the Al concentrations in treated water were, however, significantly higher than in raw water. It was also found that (1) the corrosive properties of water (low alkalinity and increased concentration of sulphates), (2) the water-treatment processes causing a decrease of the pH and an increase of the CO2, and (3) transport of the treated water over long distances (30 km) provide favourable conditions for the leaching of metals from water-pipe networks. The type of material used in domestic plumbing and the content of Ce, Fe, Mn, Ni and Cd in the tap-water at consumers show a correlation. The high content of Pb is mainly a result of lead pipes connecting the network to the buildings.
Authors and Affiliations
Józef Górski, Marcin Siepak
Keywords
Related Articles
- EP ID EP167294
- DOI 10.2478/logos-2014-0004
- Views 154
- Downloads 0
Evolution of Early Pleistocene fluvial systems in central Poland prior to the first ice sheet advance - a case study from the Bełchatów lignite mine
Deposits formed between the Neogene/Pleistocene transition and into the Early Pleistocene have been studied, mainly on the basis of drillings and at rare, small outcrops in the lowland part of Polish territory. At the Be...
Small-scale cyclic deposition in the Frasnian (Upper Devonian) of the Holy Cross Mountains, Poland
In sections exposing Frasnian limestones at five outcrops in the Holy Cross Mountains, five lithofacies (L1 to L5) that represent upper slope to basinal environments are identified. These lithofacies are characterised by...
Geochemistry and statistical analyses of porphyry system and epithermal veins at Hizehjan in northwestern Iran
Situated about 130 km northeast of Tabriz (northwest Iran), the Mazra’eh Shadi deposit is in the Arasbaran metallogenic belt (AAB). Intrusion of subvolcanic rocks, such as quartz monzodiorite-diorite porphyry, into Eocen...
Coniacian sandstones from the North Sudetic Synclinorium revisited: palaeoenvironmental and palaeogeographical reconstructions based on trace fossil analysis and associated body fossils
The Coniacian quartz sandstones (Żerkowice Member, Rakowice Wielkie Formation) that crop out at quarries near Czaple-Nowa Wieś Grodziska (North Sudetic Synclinorium) contain a low-diversity assemblage of trace fossils: G...
Stability conditions of the Vistula Valley attained by a multivariate approach - a case study from the Warsaw Southern Ring Road
Localised landslide activity has been observed in the area of the plateau slope analysed, in the vicinity of the planned Warsaw Southern Ring Road. Using calculation models quantitative and qualitative evaluations of the...