Assessment of the Possibility to Use Hybrid Electromechanical Transmission in Combat Tracked Platforms
Journal Title: Mechanics, Materials Science & Engineering Journal - Year 2017, Vol 8, Issue 1
Abstract
The article gives an estimation of possible using the hybrid electromechanical transmission performed as a series circuit in tracked vehicle of 50-tonnes weight category using the series-manufactured components of hybrid electric drive system. As components of electric drive (motor-generators and traction electric motors) it is invited to use AC induction motors with squirrel-cage rotor, that has no moving contacts and can work both in motor and generator modes, and energy storage buffer is made on the basis of consecutively connected Lithium-ion batteries.
Authors and Affiliations
V. V. Glebov, V. F. Klimov, S. A. Volosnikov
Keywords
Related Articles
- EP ID EP175369
- DOI http://seo4u.link/10.2412/mmse.83.5.981
- Views 57
- Downloads 0
Multi-Response Optimization and Regression Analysis of Process Parameters for Wire-EDMed HCHCr Steel Using Taguchi’s Technique
In this study, effect of machining process parameters viz. pulse-on time, pulse-off time, current and servo-voltage for machining High Carbon High Chromium Steel (HCHCr) using copper electrode in wire EDM was investigate...
Efficient Transient Modes of Synchronous Drive for Mining and Smelting Mechanisms
Development of starting system for synchronous motors of high-power mechanisms in mining and smelting industry, which enables proper starting characteristics and reasonable compensation of impact loads by means of synchr...
Mechanical Response of a I-Sectional Cantilever Beam under Impact Load
It is interesting to investigate the mechanical response of beam under impact load. In this study, the dynamical deformation of an I-sectional cantilever beam is taken into consideration by applying an object falling and...
New Basis Points of Geodetic Stations for Landslide Monitoring
The results of mathematical processing of modern geodetic observations of landslide processes in Dnipropetrovsk on points of observation stations in case of lost basis points are presented. Previous observations were con...
Especially the Transformation of Austenite in High-Strength Cast Iron during Processing With Continuous Cooling
The peculiarities of the transformation of austenite in high-strength cast iron with spherical-eminent graphite when machining with continuous cooling. The possibility of obtaining a bainite structure economically-alloye...