Assessment of Work Zone Safety
Journal Title: Natural and Engineering Sciences - Year 2018, Vol 3, Issue 1
Abstract
The increase in number of vehicles and deterioration of the existing facilities necessitates the need to improve the existing roadways and to build additional highways hence creating more work zones in cities around the globe. Two work zones one on a rural road and one on an urban road were studied to identify potential hazards in work zone and determine the most dangerous area of the work zone using risk concentration level. Confusing signs, use of dangerous devices for road closure, missing buffer, missing tapers, use of non-retro reflective devices, unprotected work area, dangerous flagging, missing safety alarms for heavy machineries, speed, aggressive driving and improper pedestrian access are the most dangerous hazards in work zone having a very high risk level. Transition area was found to be the most dangerous area of the work zone with a very high risk concentration level followed by working area with high risk concentration level, then advance warning area with medium risk concentration and finally termination area also with medium risk concentration. Proper installation and maintenance of temporary traffic control devices, use of safety attires by workers, fitting all moving machineries with safety alarms, use of retro reflective devices, protecting work activities, providing buffers for workers, and law enforcement will improve safety of the work zones.
Authors and Affiliations
Umar Ibrahim Khalil, Bashir Samir
Keywords
Related Articles
- EP ID EP309560
- DOI 10.28978/nesciences.379327
- Views 108
- Downloads 0
First record of the Indo-Pacific striped eel catfish, Plotosus lineatus (Thunberg, 1787) from Turkish marine waters
Three specimens of striped eel catfish, Plotosus lineatus (Thunberg, 1787) were caught by a spear gun at depths of 20 m on 4 April 2016 from Iskenderun Bay (Çevlik harbour), North-eastern Mediterranean coast of Turkey. W...
Effects of Clinoptilolite on Copper Accumulation of Oreochromis niloticus
The copper accumulation in liver and gill tissues of Oreochromis niloticus, exposed to 2 ppm Cu and 1g/L clinoptilolite singly and to the same concentrations of their mixture over 24, 48, 72 and 96 hours was studied. ICP...
Heavy Metal Pollution Around International Hatay Airport
In this study, it was aimed to determine the heavy metal pollution in the agricultural lands around Hatay airport and travel possible alteration in the amount of heavy metal on the land in accordance with the distance to...
Occurrence of the exotic shell-bearing Bulla ampulla, Linnaeus, 1758 (Mollusca, Gastropoda) in the Gulf of Antalya
Bulla ampulla, belonging to Bullidae family, is a marine gastropod species with bulb. Members of Bullidae family are distributed in tropical and temperate waters. It is usually found in habitats of sand, mud, gravel, gre...
Characterization and Construction of a Robust and Elastic Wall-Less Flow Phantom for High Pressure Flow Rate Using Doppler Ultrasound Applications
A Doppler ultrasound is a noninvasive test that can be used to estimate the blood flow through the vessels. Presently, few flow phantoms are being used to be qualified for long-term utilize and storage with high physiolo...