Auto Metro Train Shuttle between Stations
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2017, Vol 5, Issue 3
Abstract
The main aim of this project is to demonstrate the technology used in metro train movement which are used in most of the developed countries. This train consists of a controller that enables the automatic running of the train from one station to another station. In this proposed system an autonomous train will eliminates the need of any driver. Thus, any human error will not happen. In this project 8051 micro controller has been used as CPU. Whenever the train arrives at the station it stops automatically, as sensed by an IR sensor. Then the door automatically gets open and the passengers will go inside the train .It is equipped with a passenger counting section, which counts the number of passengers entering. There is the limit of time – after this the doors will be automatically closed and the train starts moving to another station. The entryway will then closes and the prepare begins (there will be a period set as of now in the matter of how long the prepare will stop at each station) set in the controller by the program. The traveler tallies and the stations are shown on a LCD show interfaced to the 8051. Prepare development is then con-trolled by an engine driver IC interfaced to the 8051. The prepare joins declaration to alarm the passengers before shutting the entryway and furthermore caution them before gazing. As prepare achieves the goal the procedure rehashes therefore accomplishing the coveted operation. Promote the venture can be improved by making this framework more progressed by showing the status of the prepare over a bigger show unit for the comfort of the travelers. The status of the prepare comprises of the parameters like, expected entry and flight time and so forth.
Authors and Affiliations
Ramana B. V, Suhail. P, Lokesh. S, Jhansi. S, Lalbasha. P
Keywords
Related Articles
- EP ID EP23634
- DOI http://doi.org/10.22214/ijraset.2017.3174
- Views 320
- Downloads 5
Improved Information for Endoscopy Diseases Using K-Mean and Super-Pixel Segmentation in Wireless Endoscopy Dataset
Wireless Capsule Endoscopy (WCE) needs computerized method to reduce the review time for its large image detain this paper, we propose an improved Bag Of Feature (BOF) method to assist classification of polyps in WCE im...
Reactive Power Improvement Using STATCOM in Wind Park Energy System
Large number of wind turbines are being installed and connected to power systems. In some of the countries the penetration of wind power is significant high so as to affect the power quality, system operation and contro...
Comparison of Handoff Using Mobile WiMAX
The next-generation Wireless Metropolitan Area Networks, using the Worldwide Interoperability for Microwave Access (WiMAX) as the core technology based on the IEEE 802.16 family of standards, is evolving as a Fourth-Gen...
Analysis of Multiband S-Shaped Microstrip Antenna for Wireless Communication
In this research paper a S-Shaped multi frequency antenna is designed. The S-Shaped patch is obtained from conventional rectangular patch by using a rectangular slot. The antenna is excited by the use of simple probe fe...
Measuring the frequency of a PZT by Interfacing Dielectric Cell with 8051MCU through MAX038
The present setup is used to measure the dielectric constant of PZT pellet. The main principle behind this work is to measure the frequency of PZT sample using P89V51RD2 microcontroller trough MAX 038 IC. The MAX038 IC...