AUTOMATIC BRAKE FAILURE INDICATOR
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 5, Issue 4
Abstract
Today, Machines are widely controlled by automated control system. To meet the need of growing population economic, effective and reliable control of machines as well as their control system is necessary. The main objective of this project is to continuously monitor the braking system at each and every time during the operation of the vehicle. Now a days, accidents are occurring due to lot of reasons, the one of the main reason is brake failure, it caused to due to poor maintenance, improper use and product defect, in order to safe guard the valuable human for accident the accident monitoring of brake is very important issue in automobile. The brake failure indicator circuit is a circuit that monitors constantly of the condition of brakes and provides an audio visual indication. When the brake is applied in order to slow down or to stop the vehicle the green LED blinks and the piezo buzzer beeps for about one second if the brake system is accurate and working properly. If brake system fails the red LED glows and the buzzer do not beep when the brakes are applied.
Authors and Affiliations
abhishek Chaudhary*,
Keywords
Related Articles
- EP ID EP164462
- DOI 10.5281/zenodo.50438
- Views 58
- Downloads 0
Fatigue Life Analysis of Thrust Ball Bearing Using ANSYS
This paper compares the total deformation of thrust ball bearing & contact stress b/w ball & raceways & its effect on fatigue life of thrust ball bearing. The 3-Dimensional Modeling has been done throu...
CLOUD COMPUTING LOAD BALANCING MODEL WITH HETEROGENEOUS PARTITION
Cloud computing is an on demand service in which shared resources, information, software and other devices are provided according to the clients requirement at specific time . In the cloud computing paradigm, the sc...
Removal of Colour from Textile Wastewater Using Two- Step Coagulation Process
The waste water from the textile dyeing industry produces large amount of coloured water and this needs to be treated before discarding in the ecosystem. There are various treatment technologies to remove colour f...
Utilization of DVTS for Power Dissipation in Submicron Fabrication
Power dissipation is one of the critical design factors in microelectronics industry which opens lot of space for advance development in deep sub micron fabrication techniques for the devices. Low power design red...
ELECTROCHEMICAL CHLORIDE EXTRACTION FROM CONCRETE STRUCTURE EXPOSED TO DEAD SEA WATER
Eighteen concrete samples with different concrete mixes, overlay thicknesses, and w/c ratios were cast and immersed in Dead Sea water bath. Potential readings were recorded over 7-month time period and results wer...