Automatic Handling Equipment for Laser Cutting
Journal Title: Machine Design - Year 2018, Vol 10, Issue 3
Abstract
The article is devoted to the presentation of the results of the research project Req-00163-003 entitled "Research of CNC technology nodes for cutting materials using energy-beam technologies". The aim of the project is a conceptual design of an automatic modular system for loading a workpiece onto a workbench of a laser cutting machine and unloading a completely cut sheet metal. The system will be designed for machines with a work area of 3x1,5m and 4x2m. The authors devote themselves to the design and development of the construction nodes, in particular the automatic sorting system, the problem of the vacuum suction cups, their correct distribution and correct choice of the individual types of suction cups. The paper presents partial results of the design of an automatic sheet metal loading and unloading system
Authors and Affiliations
Iveta Onderova, Juraj Ondruška, Ludovit Kollath, Ľubomír Šooš, Andrej Smelik, Alexander Varga
Gasodynamic Study of the Intake Route at a Spark-Ignition Engine
This study aims at determining, by experiment, the pressure loss occurring on the intake route of a sparkignition engine with carburettor. For this purpose, a pilot plant was designed for measuring the pressure at variou...
Cavitation Erosion Behavior of Some Gas Nitrated Steels
Older researches, conducted by Garcia and Hammitt (published in 1960) showed that hardness is an important factor in increasing the resistance of the surfaces exposed to cavitation erosion. As a result, in present more a...
Rubbing Fastness Properties of Ink Jet Prints on Plastic Materials
During exploitation, plastic materials printed with ink jet printing technique are quite often exposed to various influences (rubbing, heat, UV radiation, moisture, washing, etc.). Those influences can affect the quality...
Determination of Basic Mechanical Parameters of the Tractor Tyre by Using Universal Approach
Tyre behaviour exerts crucial impact on every aspect of vehicle dynamics response. It is therefore of interest to have access to appropriate tyre model in order to address vehicle behaviour optimization by means of compu...
End-Milling Force Control System with Surface Roughness Monitoring
The aim of this paper is to present an adaptive force regulation system in end milling with the newly developed surface roughness prediction model. The relations between measured cutting force, cutting conditions and act...