AUTOMATION OF CALCULATIONS OF TECHNICAL CHARACTERISTICS OF MANOMETRIC TUBULAR SPRINGS
Journal Title: Journal of Mechanical Engineering Research & Developments (JMERD) - Year 2019, Vol 42, Issue 2
Abstract
Tubular springs have received the name “Manometric” thanks to their initial use in manometric devices. For the wide use of tubular springs in various spheres of human activity, relevant methods of calculating their static and dynamic characteristics are needed. Many works have discussed the study of manometric tubular springs. The main method for calculating static characteristics of springs is the semi-membrane theory of shells, and to calculate the frequencies of natural oscillations, the spring was considered as a rod with a deformable cross-section. The article considers algorithms for calculation of static characteristics and frequencies of natural oscillations of manometric tubular springs with known geometric parameters of a spring and physical properties of a material. For calculations, in general, numerical methods were used, so for their implementation, it was required to develop programs for automatic design, in which the algorithms are implemented. The article describes the software systems for calculating the characteristics of springs: “Module” and “PCRMTP”, which allow investigating the stress-strain state of the cross-section of tubular springs, determine their static characteristics with known geometric parameters, spring material, internal pressure and operating conditions. In addition, in the complex “PCRMTP” the possibility of calculating the frequencies of natural oscillations of tubular springs is realized. The automation of the design of tubular springs significantly reduces the labour input of selecting springs with the necessary characteristics and thereby eliminates the deterrent factor of introducing new designs.
Authors and Affiliations
Sergey P. Pirogov, Aleksandr Yu. Chuba
Keywords
Related Articles
- EP ID EP502220
- DOI 10.26480/jmerd.02.2019.27.29
- Views 56
- Downloads 0
MECHANICAL CHARACTERIZATION AND COMPARATIVE STUDY ON POLYESTER COMPOSITE LAMINATES REINFORCED WITH DIFFERENT BIO WASTE MATERIALS
The composites are the promising materials of this century, amongst that different types of polymeric matrix reinforced with different materials found application in many of the service industries. In most of the cases t...
ENVIRONMENT-FRIENDLY LOGGING IN THE CONTEXT OF WATER LOGGED SOIL AND KNOB- AND-RIDGE TERRAIN
Wood is an important building material. However, its major reserves are in hard-to-reach are-as, such as water-logged soils, mountain and knob-and-ridge terrains. This situation leads to large wood extraction costs, beca...
TRACKING MAXIMUM POWER POINT FOR PHOTOVOLTAIC SYSTEM USING A NOVEL DIFFERENTIAL PARTICLE SWARM OPTIMIZATION
In this paper, a new differential particle swarm optimization (DPSO) method is investigated for tracking the maximum power point (MPP) for the photovoltaic (PV) system in order to enhance the operating efficiency of the...
ENERGY AND EXERGY ANALYSIS OF A SOLAR PHOTOVOLTAIC PERFORMANCE IN BAGHDAD
Photovoltaic modules usually generate electricity from a specific range of light frequencies and cannot cover the whole solar range of infrared, ultraviolet and diffused light. Hence, much of the striking sunlight energy...
LOW COST SOFT ROBOTIC GRIPPERS FOR RELIABLE GRASPING
Soft robotic gripper shows valuable role in those tasks where robotic gripper met delicate objects. Comparison with rigid grippers, soft robotic gripper can grip/manipulate variety of target objects. This paper presents...