BEARING CAPACITY OF STEEL-CONCRETE BENT ELEMENTS REINFORCED WITH ADDITIONAL UNSTRAINED ARMATURE AT DIFFERENT LEVELS OF STRAINED STATE

Abstract

In this article, there are given the results of studies on the strength of steel-concrete bent elements, in which additional reinforcement was introduced at various levels of initial reinforcement and loading, as well as after unloading, and the beams were brought to destruction. The need for overhead cover reinforcement during the process of its exploitation appears not only in the course of reconstruction but also due to its physical aging that is caused by various factors. Accomplished part of the research does not take into account the prehistory of the work of the bent element before reinforcement or takes it into account approximately. The objective of the study of bent elements, in which the reinforcement with additional unstrained reinforcement is performed under the current load of different levels, has practical and theoretical significance. Moreover, such study is urgent and the solution of the problem will contribute to the growth of the economic efficiency of reinforcing steel-concrete structures.

Authors and Affiliations

V Barabash, Andrii Kramarchuk, Borys Ilnytskyy

Keywords

Related Articles

Оцінка енергетичного потенціалу сезонного теплового акумулятора для пасивних будинків

Every year in Ukraine the demand for passive houses is increased. The passive houses are characterized by specific consumption of thermal energy for heating system up to 15 kWh/(m²*year). The solar power is the most prom...

COLLAPSING OF THE REINFORCED CONCRETE ROOF BEEM DESIGNED FOR THE INDUSTRIAL BUILDDING. ITS CAUSES, WORKING CONDITIONS AND CONDITIONS FOR SAFETY OF REMAINING ROOF BEAMS

The project of the production house features the design of concrete roof. The roof is composed of typical precast reinforced concrete beams: single-slope (for ending spans) and double-slope (for middle span). The beam ty...

Теплова ефективність комбінованої геліосистеми в режимі протоку за південно-східного та південно-західного напрямку орієнтації

Solar radiation - is an inexhaustible source of renewable energy. Using solar energy is sufficiently promising to improve the environmental situation, reducing of consumption of fossil fuels, as well as for household and...

АНАЛІЗ ЗА ДОПОМОГОЮ МАТЕМАТИЧНОГО МОДЕЛЮВАННЯ ЗАЛИШКОВОЇ НЕСУЧОЇ ЗДАТНОСТІ ІСНУЮЧИХ ЕЛЕМЕНТІВ КОНСТРУКЦІЙ ПРИ ПІДСИЛЕННІ

During the operation of the building there are situations when it is necessary to change the planning decision, which leads to interference in the bearing elements of the structure. Strengthening of any element of design...

ЗБІРНО-МОНОЛІТНІ ЗАЛІЗОБЕТОННІ ДВОБАЛКОВІ НЕРОЗРІЗНІ ПРОГОНОВІ БУДОВИ МОСТІВ ДЛЯ СКЛАДНИХ УМОВ БУДІВНИЦТВА І ЇХ РОЗРАХУНОК

A significant increase of the intensity of road and urban transport requires new approaches to its improvement, especially in areas with dense existing buildings. The solution of this problem may be improving by building...

Download PDF file
  • EP ID EP438838
  • DOI -
  • Views 151
  • Downloads 0

How To Cite

V Barabash, Andrii Kramarchuk, Borys Ilnytskyy (2018). BEARING CAPACITY OF STEEL-CONCRETE BENT ELEMENTS REINFORCED WITH ADDITIONAL UNSTRAINED ARMATURE AT DIFFERENT LEVELS OF STRAINED STATE. Вісник Національного університету "Львівська політехніка". Серія "Теорія та практика будівництва", 0(888), 3-11. https://europub.co.uk/articles/-A-438838