Behavior of Ni/Al2O3 Nanocomposite Thin Layers in Corroding Environment
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2009, Vol 32, Issue 2
Abstract
This paper investigates the effects of adding alumina nanoparticles in the electrolyte bath on surface topomorphologies and structure of electrodeposited nickel. The influence on the corrosion process in NaCl solutions having various concentration was investigated by using impedance spectroscopy. The experimental data indicates the beneficial roles of alumina nanoparticles on Ni/Al2O3 nanocomposite thin films. The structure of electrocodeposited nanocomposite thin films was investigated by XRD and SEM techniques.
Authors and Affiliations
Constantin GHEORGHIEŞ, Livia GHEORGHIEŞ, V. O. ATANASIU
Aspects of Materials Decay Under Chemical Attack from the Leachate Treatment Plant of the Tirighina Waste Landfill
Human society faces a number of major problems among which the increasingly negative consequences of environmental pollution. The high uses rate of the natural resources and the large amount of waste generated tend to tr...
Studies About Electrochemical Plating with Zinc-Nickel Alloys
The electrochemical deposition of zinc and combinations with elements of the 8th group of the Periodic System (nickel, cobalt, iron) have good properties for anticorrosive protection, compare with pure zinc. For steel pi...
Chemical and Structural Changes for Bimetallic Materials Obtained by the Welding Process
This paper presents the transformations which take place during the obtaining process of bimetallic materials. As a plating process was used the welding. The added material was a bronze with aluminum complex alloyed with...
Determining the Reliability of Clincher Coolers
For any industrial entity that is put into operation, the problem of maintaining its functioning if possible, with corresponding technical and technological parameters without failure is an important issue. This is provi...
An Analytical Procedure for the Prediction of the Stress-Strain State in Notches under Multiaxial Fatigue
This work presents an analytical procedure for estimating elastic-plastic stresses and strains in notched shafts subjected to synchronous non-proportional torsional and tensile cyclic loading. The specification of the eq...