Behaviour of Water Droplets Under the Influence of a Uniform Electric Field in Nanocomposite Samples of Epoxy Resin/TiO2
Journal Title: Engineering, Technology & Applied Science Research - Year 2013, Vol 3, Issue 5
Abstract
In this paper nanocomposite samples of epoxy resin and TiO2 nanoparticles were investigated with water droplets on their surface. A uniform electric field was applied and the behaviour of the water droplets was observed. Parameters that were studied were the water conductivity, the droplet volume, the number of droplets and the droplet positioning with respect to (w.r.t.) the electrodes. All above mentioned parameters influence the flashover voltage of the samples. It is to be noted that – at least in some cases – the water droplet positioning w.r.t. the electrodes was more important in determining the flashover voltage than the droplet volume.
Authors and Affiliations
Α. Bairaktari, M. Danikas, X. Zhao, Y. Cheng, Y. Zhang
Keywords
Related Articles
- EP ID EP89569
- DOI -
- Views 290
- Downloads 0
Using Resistivity Measurements to Determine Anisotropy in Soil and Weathered Rock
This study uses electrical resistivity measurements of soils and weathered rock to perform a fast and reliable evaluation of field anisotropy. Two test sites at New Concord, Ohio were used for the study. These sites are...
PFC Control for LED Lamp Driver Using Sensorless Predictive Current Controller
Light-emitting diodes (LEDs) have recently become of utmost significance to replace conventional lighting sources. Power factor correction (PFC) control of LED lamps requires three sensors which cause more cost, increase...
New Modeling and Simulation Platform for Communications Systems:(I) Double Sideband Suppressed Carrier AM Modulator DSB-SC
The main goal of this paper is to introduce a new platform for the implementation and simulation of communication systems. SCILAB/SCICOS is an open source software for conducting communication system related experiments,...
An IoT Based Real-Time Environmental Monitoring System Using Arduino and Cloud Service
Internet of Things (IoT) is expected to play a major role in our lives through pervasive systems of sensor networks encompassing our environment. These systems are designed to monitor vital physical phenomena generating...
Modeling and Parameter Optimization for Surface Roughness and Residual Stress in Dry Turning Process
The influence of some turning variables and tool overhang on surface roughness parameters and residual stress induced due to machining 6061-T6 aluminum alloy is investigated in this paper. Four input parameters (cutting...