Calculating Optimum Gear Ratios of Mechanical Driven Systems Using Three Step Bevel Helical Gearbox and Chain Drive for Minimum System Height
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 5
Abstract
The current study is aimed at determining optimum gear ratios of mechanical driven systems using a three-step bevel helical gearbox and a chain drive. An optimization problem with the objective function as the minimum gearbox height was constructed. Six input parameters including the total system ratio, the face width coefficients of the bevel and the helical gear sets, the allowable contact stress and the output torque were discussed, and their effects on the optimum gear ratios were considered through the implementation of a simulation experiment. The findings revealed, the evaluation of the factor influences, moreover, the proposed equations indicated that the optimum gear ratios can be obtained with high precision.
Authors and Affiliations
Tran Thi Hong, Le Hong Ky, Nguyen Van Cuong, Nguyen Thanh Tu, Vu Ngoc Pi
Keywords
Related Articles
- EP ID EP671646
- DOI 10.24247/ijmperdoct201919
- Views 79
- Downloads 0
Effect of Seawater on Properties of HDPE Material Used for Floating Solar Applications
Solar Energy is one of the most renewable and ready sources of energy available in plenty and free on planet earth.Ground mounted solar PV system is used worldwide for installing the largesolar system. Due to the constra...
The Numerical Analysis of Marine-Ship Propeller
In this paper, numerical simulationwas done to decide the hydrodynamic qualities in a cavitatingviscous stream of the standard INSEAN E779A in single and couple propeller arrangement utilizing cavitation show executed in...
Optimization and Analysis of Process Parameters in Micro-Drilling Using Response Surface Methodology
High precision and high spindle speed applications is one of the most significant factors in fundamental technologies in machining processes, which is of good productivity and quality. When the basic machining process, ‘...
Thermo structural Analysis of Structural Plates
This paper aims the evaluation of the thermal réponses, stresses, deformations and frequencies for Structural Steel and Aluminum. Thermal, Static, Modal and Random vibration analysis are performed on the plates for Struc...
Theoretical Approach to Predict Friction Coefficients of Viscous Non-Newtonian Liquids in Turbulent Pipe Flow
OBJECTIVES To establish analytical expressions for the thickness of laminar sublayer and turbulent boundary layer and friction coefficients of turbulent purely viscous non-Newtonian pipe flows as the function of apparent...