Calculation of constructive parameters of SMA damper
Journal Title: Вісник Тернопільського національного технічного університету - Year 2017, Vol 88, Issue 4
Abstract
Shape memory alloy (SMA) based damper device is presented in this paper. The device is composed of pre-tensioned SMA wires and two pre-compressed springs which supply tension of the wires. Pre-tensioned SMA wires provide the system reliability and good damping properties. After removing the external load pre-compressed springs provide recovery of the device to its original shape. The calculation method of strength and constructive parameters of the damping device is offered. The internal force, the maximal displacement value and the pre-tension magnitude of SMA wires are defined. The maximum allowable internal force of the wires is determined.
Authors and Affiliations
Petro Yasniy, Mykola Kolisnyk, Oleksandr Kononchuk, Volodymyr Iasnii
Keywords
Related Articles
- EP ID EP280222
- DOI 10.33108/visnyk_tntu2017.04.007
- Views 57
- Downloads 0
Reissner’s plate bilateral bending containing coaxial through-the-thickness slit and crack taking into account contact zone width of its faces
Construction of the cracked plate bending problems solutions forms an important and actual in terms of theory development and practical applications scientific direction. They make it possible to determine stress and dis...
Influence of gas hydrates and concentration of corrosive components on the nature and speed of corrosion processes on pipelines
According to the results of corrosion-mechanical tests for the first time the regularities of mutual action of mechanical stresses, concentration of chlorides and hydrate formation on the rate and localization of corrosi...
Hollow block floor’s survey of the building of the early 20th century using modern diagnostic methods
The article provides the results of technical survey of the building of the beginning of the 20th century using modern non-destructive testing devices. The possible variants of the design of monolithic hollow floors are...
Computer modeling of the stresses in welded truss
The stresses localization in the construction elements of welded roof truss that is 18000x3600 mm and is made of 100х100х10 mm steel rolled L-bar is studied. The nodes are designed without adapters. Computer modeling of...
Finite element method in spatial filtration consolidation problem with thin semi-permeable inclusions under the influence of the heat and salt transfer
Mathematical model of filtration consolidation of soils, taking into account available there thin semi-permeable inclusions in three-dimensional case, has been constructed. The finite element method was used for numerica...