CALCULATION OF TRANSIENTS IN ELECTRICAL CIRCUITS WITH «INCORRECT» INITIAL CONDITIONS WITH THE HELP OF THE DUHAMEL INTEGRAL AND DISCONTINUOUS FUNCTIONS
Journal Title: Електротехніка і Електромеханіка - Year 2018, Vol 0, Issue 4
Abstract
A technique for calculating transients using the Duhamel integral and discontinuous functions is presented. On specific examples, the procedure for calculating «incorrect» problems with respect to differential equations, compiled according to Kirchhoff laws, and using the Duhamel integral is presented. In this case, the Kirchhoff law and the transition characteristic in the Duhamel integral are written using unitary discontinuous functions for the electrical circuit as a whole (before and after commutation). It is shown that the application of discontinuous functions for describing piecewise continuous input signals and switching in an electric circuit extends the domain of applicability of the Duhamel integral.
Authors and Affiliations
V. M. Boev
Keywords
Related Articles
- EP ID EP491654
- DOI 10.20998/2074-272X.2018.4.07
- Views 97
- Downloads 0
AN ACTIVE POWER FILTER AT OPERATION ON THE UNBALANCED AND NONLINEAR LOADS WITH CONTROL BY OPTIMIZATION ALGORITHM
Purpose is to develop a method for controlling a power active filter based on search optimization using software of Mathlab package and applying this method for balancing and compensating for all components of reactive p...
FINITE ELEMENT TECHNIQUE FOR SOLUTION OF THERMO-CONTACT PROBLEMS AND ITS APPLICATION IN NUMERICAL ANALYSIS OF DEVICES WORKING WITH INDUCTION HEATING
Purpose. To develop an effective approach for the numerical solution of transient thermo-contact problems and present a typical example of its utilization regarding devices working on the principle of thermoelasticity pr...
AN ANTHOLOGY OF THE DISTINGUISHED ACHIEVEMENTS IN A SCIENCE AND TECHNIQUE. PART 23: INVENTION OF MICROSCOPE AND STUDY OF MICROSCOPIC WORLD
A short essay is resulted from world history of invention of microscopes. The basic types of microscopes are described; directions and some results of their application are indicated at the study of microscopic world.
DETERMINATION OF INSULATION PARAMETERS OF CURRENT TRANSFORMERS AT MULTIPLE MEASUREMENTS IN MONITORING SYSTEMS UNDER WORKING VOLTAGE
Features of the data processing procedures of multiple measurements of the dielectric loss tangent of the high-voltage insulation, which are based on the comparison method, were considered. Three procedures were compared...
DETERMINATION OF DIRECTION TO RECONSTRUCTION OF GROUNDING SYSTEM
Purpose. In paper the most efficient and economical way for bringing the grounding system of power facilities into compliance with requirements of normative parameters was determined. Methodology. The determination was b...