CALIBRATION OF A UNIAXIAL COMPRESSION TEST FOR ROCK USING THE DISCRETE ELEMENT METHOD IN LS-DYNA

Journal Title: International Journal of Civil Engineering and Technology - Year 2019, Vol 10, Issue 3

Abstract

The discrete element method (DEM) was combined with the finite element method (FEM) approach to investigate the numerical response of granite material under uniaxial compression loading. A calibration analysis was performed in this study using the commercial software LS-DYNA. The aim of this work was to calibrate the micro-parameters in a numerical simulation using a bonded particle model of granite rock. In this DEM-FEM simulation, the rock specimen was modelled in DEM, while the steel plates were simulated using FEM. The numerical analysis was then compared to experimental data from a standard uniaxial compression test. The results show that the DEM-FEM simulation can reproduce the trends in the experimentally observed stress-strain curve for granite rock under uniaxial compressive loading. Comparisons were carried out of the values for UCS and Young’s modulus from experimental data and numerical analysis, and these showed that the UCT DEM/BPM model fits within the range of values for UCS and Young’s modulus from laboratory test results, i.e. 52.63–87.96 MPa and 10.13–20.76 GPa

Authors and Affiliations

MUHAMMAD I. SHAHRIN, RINI A. ABDULLAH, SEOKWON JEON AND RADZUAN SA’ARI

Keywords

Related Articles

ESTIMATION OF THE SHEAR WAVE VELOCITY FOR INDORE CITY USING VARIOUS CORRELATIONS

Shear modulus of the different types of soils can be estimated using the shear wave velocity (Vs) measured by the correlations between the Shear Wave Velocity (Vs) and the Standard Penetration Tests (SPT-N values). The...

RECOGNITION OF EMOTIONS BY FACIAL GEOMETRY USING A CAPSULE NEURAL NETWORK

The article is devoted to the problem of improving the efficiency of neural network means of emotion recognition by the geometry of the human face. It is shown that one of the most significant drawbacks of modern neura...

DEVELOPMENT OF A MODEL OF CYBER SECURITY MANAGEMENT FOR AUTOMATED SYSTEMS

A model of a system of managing information security of automated data processing systems of critical application is offered in the article. The model allows to evaluate the level of risk for the information security a...

PROSPECTIVE BENEFITS OF USING ACTIVATED CARBON IN CEMENT COMPOSITES- AN OVERVIEW

An exhaustive study of available literature on use of activated carbon in cement composites was done. Adsorptive nature of activated carbon can be effectively used to remove toxic air pollutants such as nitrogen oxide,...

INTRODUCTION TO TECHNOLOGISED QURANIC LEARNING IN ULUL ALBAB QURANIC STUDIO

This article aims to introduce Ulul Albab Quranic Studio (UAQS) which was built upon cooperation between University Malaysia Terengganu and Education Welfare Council of Besut and analyse its usage from the aspect of te...

Download PDF file
  • EP ID EP46710
  • DOI -
  • Views 196
  • Downloads 0

How To Cite

MUHAMMAD I. SHAHRIN, RINI A. ABDULLAH, SEOKWON JEON AND RADZUAN SA’ARI (2019). CALIBRATION OF A UNIAXIAL COMPRESSION TEST FOR ROCK USING THE DISCRETE ELEMENT METHOD IN LS-DYNA. International Journal of Civil Engineering and Technology, 10(3), -. https://europub.co.uk/articles/-A-46710